Skip to the content
2 layers90 × 100 mmStarbie, the printed circuit board in 3D

This is my bunny shaped starbie!! This is also my first pcb project.

Size
90 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
25
Pads
60
Tracks, vias
102, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
10 Oct 2026
Updated
11 Oct 2026

Overview

Starbie is an open-source printed circuit board by flatcherrysoda, from the flatcherrysoda/bunny-starbie repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 100 mm with 14 parts on 25 nets, routed with 102 tracks and 0 vias.

It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

bunny-starbie

This is my bunny shaped starbie!! Screenshot 2026-10-09 185146 Screenshot 2026-10-09 184315

design

This project was my first time working with Kicad and design a pcb. I went for a pixel bunny shaped design. It was kind of hard to arrange all the items in the bunny shape. My first plan was to put all the items on the side and add a large image on the right, but that made it hard to route everything. So, I moved them around. But also it took me WAYYYY to long to realize that you could route on the back, and after I figured that out it was easier. Lastly I add some cute bunny images I found to the silkscreen to match the outline. Screenshot 2026-10-10 194102

sprite

I also made my own bunny sprite to match my bunny starbie shape. This pixel art was hard to get right and the portions were hard to scale correctly. But I think it came out good still. Screenshot 2026-10-09 182523

Parts

14
QtyValueFootprintReferences
7LOGOLOGO*, *, *, *, *, *, G***
2SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2
110kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1Conn_01x04_PinImported Parts:Display_128x64_096_I2CJ1
1Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU2
1XIAO-ESP32-C3-SMDImported Parts:XIAO-ESP32-C6-DIPU1

Similar boards

  • 2 layers96.6 × 82.8 mmStarbie, the printed circuit board in 3D

    Starbie

    SharKingStudios/Starbie

    Half-Life Week 1 Example Project

    11 parts28MIT
  • 2 layers100 × 50 mmConveyor belt pcb, the printed circuit board in 3D

    Conveyor belt pcb

    lansidev/conveyor-belt

    Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi

    22 parts9MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers62 × 19.3 mmSniffingTrinket, the printed circuit board in 3D

    SniffingTrinket

    GeorgK/SniffingTrinket

    A room climate monitor using the Adafruit Trinket Pro

    23 parts6GPL-3.0
  • 2 layersArduino relay, the printed circuit board in 3D

    Arduino relay

    bhaskar9980/Guardian

    Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

    58 parts5MIT
  • 2 layers100 × 43.5 mmFirefly, the printed circuit board in 3D

    Firefly

    Twistx77/Firefly

    Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

    33 parts5GPL-3.0
  • 2 layers30.5 × 77.5 mmProyecto sensor temperatura, the printed circuit board in 3D

    Proyecto sensor temperatura

    unla-investigacion-desarrollo/ecosistema-iot

    Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:

    8 parts5

Questions

How big is the Starbie PCB?

It measures 90 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Starbie use?

14 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Starbie KiCad files?

From the flatcherrysoda/bunny-starbie repository on GitHub, at the commit this page was made from: the board is pcb/Starbie.kicad_pcb and its schematic pcb/Starbie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Starbie design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).