

Starbie
This is my bunny shaped starbie!! This is also my first pcb project.
- Size
- 90 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 25
- Pads
- 60
- Tracks, vias
- 102, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 Oct 2026
- Updated
- 11 Oct 2026
Overview
Starbie is an open-source printed circuit board by flatcherrysoda, from the flatcherrysoda/bunny-starbie repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 100 mm with 14 parts on 25 nets, routed with 102 tracks and 0 vias.
It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdbunny-starbie
This is my bunny shaped starbie!!
design
This project was my first time working with Kicad and design a pcb. I went for a pixel bunny shaped design. It was kind of hard to arrange all the items in the bunny shape. My first plan was to put all the items on the side and add a large image on the right, but that made it hard to route everything. So, I moved them around. But also it took me WAYYYY to long to realize that you could route on the back, and after I figured that out it was easier. Lastly I add some cute bunny images I found to the silkscreen to match the outline.
sprite
I also made my own bunny sprite to match my bunny starbie shape. This pixel art was hard to get right and the portions were hard to scale correctly. But I think it came out good still.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | LOGO | LOGO | *, *, *, *, *, *, G*** |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x04_Pin | Imported Parts:Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | XIAO-ESP32-C3-SMD | Imported Parts:XIAO-ESP32-C6-DIP | U1 |
Similar boards
- 2 layers96.6 × 82.8 mm

- 2 layers100 × 50 mm

Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm

- 2 layers

OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm

SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers

Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm

Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm

Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5
Questions
How big is the Starbie PCB?
It measures 90 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starbie use?
14 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starbie KiCad files?
From the flatcherrysoda/bunny-starbie repository on GitHub, at the commit this page was made from: the board is pcb/Starbie.kicad_pcb and its schematic pcb/Starbie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starbie design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).