4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers114.3 × 76.2 mm
Swagger right
flamwenco/swaggerA split wireless 12u 40% keyboard
- Size
- 114.3 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 49
- Pads
- 216
- Tracks, vias
- 329, 61
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 9 May 2023
- Updated
- 17 Aug 2026
Overview
Swagger right is an open-source printed circuit board by flamwenco, from the flamwenco/swagger repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 114.3 × 76.2 mm with 55 parts on 49 nets, routed with 329 tracks and 61 vias.
It is built around the WS2812B. Its parts include 24 diodes, 21 switches, 3 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdSwagger
A split 12u board, designed as a (mostly) drop-in replacement for Twoyo, with some added niceties centered around wireless use.
The PCB and plate should be drop-in compatible with existing Twoyo cases as long as the JST port for the battery is not soldered on, but I make no guarantees.
Special Thanks
GEIST, I referenced several of his projects (KLOR and TOTEM especially) since this was my first split board
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4 |
| 15 | SW_PUSH-MX_W_LED | cipulot_parts:MXOnly-1U-NoLED | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW12, SW13, SW14, SW15, SW19 |
| 4 | MountingHole_4mm | MountingHole:MountingHole_4mm | MH1, MH2, MH3, MH4 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D23, D24, D25, D26 |
| 3 | SW_PUSH-MX_W_LED | cipulot_parts:MXOnly-1.25U-NoLED | SW16, SW18, SW20 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J3 |
| 1 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Device_Jumper_NO_Small | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | MJ-4PP-9 | kbd:MJ-4PP-9_1side | J1 |
| 1 | ProMicro | cipulot_parts:Elite-C | U1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW23 |
| 1 | SW_DPDT_x2 | marbastlib-various:SW_MSK12C02-HB | PSW1 |
| 1 | SW_PUSH-MX_W_LED | cipulot_parts:MXOnly-1.75U-NoLED | SW11 |
| 1 | SW_PUSH-MX_W_LED | cipulot_parts:MXOnly-2.25U-ReversedStabilizers-NoLED | SW17 |
Questions
How big is the Swagger right PCB?
It measures 114.3 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Swagger right use?
55 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Swagger right KiCad files?
From the flamwenco/swagger repository on GitHub, at the commit this page was made from: the board is Kicad Project Files/right/swagger-right/swagger-right.kicad_pcb and its schematic Kicad Project Files/left/left-plate/left-plate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Swagger right design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm
- 2 layers95.3 × 161.9 mm
- 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm
- 2 layers285.5 × 95 mm
- 2 layers177.7 × 144.5 mm
