Skip to the content
2 layers245.3 × 75.6 mmKb45p, the printed circuit board in 3D

flabbergast's kicad files

Size
245.3 × 75.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
109
Nets
76
Pads
577
Tracks, vias
610, 47
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
24 Jan 2016
Updated
28 Jan 2018

Overview

Kb45p is an open-source printed circuit board by flabbergast, from the flabbergast/kicad repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 245.3 × 75.6 mm with 109 parts on 76 nets, routed with 610 tracks and 47 vias.

Its parts include 49 switches, 45 diodes, 4 capacitors, 2 resistors and 2 ICs. It belongs with the STM32 boards of this library.

README

README.md

flabbergast's kicad files

kb45p

This is a PCB for a 45% keyboard. Supports ALPS and Cherry MX switches. No LEDs, only one SMT LED on the front bottom side. The supported layouts are this and this.

The controller MCU is STM32F042K6T7 - 32kB flash, 6kB RAM, DFU bootloader in ROM, LQFP-32 package. The BOOT0 pin for entering the bootloader on power up is brought out to a pushbutton on the bottom side of the PCB.

Parts

109
QtyValueFootprintReferences
45SWflabbergast:MXALPSS11, S12, S13, S21, S22, S23, S24, S31, S32, S33, S34, S41, S42, S43, S44, S51 +29
44DIODEkeyboard_parts:D_SOD123_axialD11, D12, D13, D21, D22, D23, D24, D31, D32, D33, D34, D41, D42, D43, D44, D51 +28
555_8MMflabbergast:HOLE_OVAL_55_8HOLE, HOLE, HOLE, HOLE, HOLE
20.1uFflabbergast:1206_annot_bothC1, C2
22.2uFflabbergast:1206_annot_bothC3, C4
2STAB200flabbergast:STAB200_PCBS1, S1
110kRflabbergast:1206_annot_bothR1
11kRflabbergast:1206_annot_bothR2
1BOOT0_BTNflabbergast:TACTILE-SWITCH-SMT-DPSTS1
1DEBUG_CONflabbergast:M05_NOSILKCON1
1LEDflabbergast:LED-1206D1
1MCP1703T_3LEADkeyboard_parts:SOT23-3_HSOLIC2
1STAB625flabbergast:STAB625_PCBS1
1STM32F042keyboard_parts:QFP32_reflowIC1
1USB_mini_micro_Bflabbergast:USB_microB_4THJ1

More from flabbergast/kicad

2
  • 2 layers35.6 × 17.8 mmStm32 qfp48 breakout, the printed circuit board in 3D

    Stm32 qfp48 breakout

    flabbergast/kicad

    flabbergast's kicad files

    28 parts9BSD-3-Clause
  • 2 layers31.8 × 17.8 mmSerplus batshield, the printed circuit board in 3D

    Serplus batshield

    flabbergast/kicad

    flabbergast's kicad files

    17 parts9BSD-3-Clause

Similar boards

  • 2 layers208.8 × 393.9 mmFerris, the printed circuit board in 3D

    Ferris

    pierrechevalier83/ferris

    A low profile split keyboard designed to satisfy one single use case elegantly

    109 parts1.3k
  • 2 layers89 × 100 mmHub16, the printed circuit board in 3D

    Hub16

    joshajohnson/Hub16

    A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

    109 parts388
  • 2 layers191.8 × 121.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    109 parts184
  • 2 layers77.4 × 128.5 mmOak, the printed circuit board in 3D

    Oak

    tpcarlson/synth-diy

    Mostly Eurorack projects

    109 parts107
  • 2 layers110 × 97.2 mmPcbBot, the printed circuit board in 3D

    PcbBot

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    109 parts94BSD-3-Clause
  • 2 layers126.5 × 103.6 mmInput, the printed circuit board in 3D

    Input

    jamessa/Pragmatic

    A modular split keyboard kit.

    109 parts73MIT
  • 2 layers55 × 100 mmESP32AY, the printed circuit board in 3D

    ESP32AY

    djspawnbrest/ESP32AY

    ZxPod - ESP32 based AY multiformat player

    109 parts59GPL-3.0
  • 2 layers70.5 × 128.3 mmAttenuator Offset II, the printed circuit board in 3D

    Attenuator Offset II

    Blinken-Lights/ASCII

    ASCII Modular hardware and software repo

    109 parts50MIT

Questions

How big is the Kb45p PCB?

It measures 245.3 × 75.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Kb45p use?

109 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kb45p KiCad files?

From the flabbergast/kicad repository on GitHub, at the commit this page was made from: the board is kb45p/kb45p.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kb45p design in my own project?

Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).