2 layers217.3 × 393.8 mm
2 layers129.8 × 95.5 mm
Architeuthis dux custom
filterpaper/split_pcbs9Open source split PCB mods
- Size
- 129.8 × 95.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 22
- Pads
- 153
- Tracks, vias
- 3,022, 0
- Pours
- 204
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Sep 2021
- Updated
- 25 Aug 2022
Overview
Architeuthis dux custom is an open-source printed circuit board by filterpaper, from the filterpaper/split_pcbs repository on GitHub. It is a 2-layer board of 129.8 × 95.5 mm with 20 parts on 22 nets, routed with 3,022 tracks and 0 vias.
Its parts include 17 switches and 1 capacitor. It belongs with the keyboards and input boards of this library.
README
Architeuthis dux/README.mdSimplified Architeuthis dux
Simplified versions of tapioki's Architeuthis dux with hotswap socket and puck support removed, fixed phantom drill holes
Instructions
To build an Architeuthis dux, you need the following:
- 2 pro-micro controllers (Elite-C or Pro-micro C)
- 2 PJ320A audio jack
- 1 male-to-male TRRS cable
- 34 Kailh choc v1 switches and keycaps
- Rubber feet or bumbers for the bottom
- Optional: low profile socket with Mill-max pins, or budget socket pins with round pin headers
Note: Architeuthis dux is a double sided PCB so controllers face down on the left and face up on the right.
QMK Firmware
To build the QMK firmware, run:
qmk compile -kb a_dux -km defaultParts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | PG1350 | S2, S4, S6, S10, S12, S14, S16, S18, S20, S22, S24, S26, S28, S30, S32, S34 +1 | |
| 1 | TRRS-PJ-320A-dual | T1 | |
| 1 | ProMicro | C1 | |
| 1 | LOGO | Kicad:BIGSQUID | G*** |
More from filterpaper/split_pcbs
12- 2 layers238.2 × 206.5 mm
- 2 layers217.4 × 393.8 mm
- 2 layers217.3 × 393.8 mm
- 2 layers238.2 × 206.5 mm
- 2 layers229.5 × 95.1 mm
- 2 layers217.4 × 86.8 mm
- 2 layers17.8 × 31.9 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
- 2 layers119.6 × 206.5 mm
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the Architeuthis dux custom PCB?
It measures 129.8 × 95.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Architeuthis dux custom use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Architeuthis dux custom KiCad files?
From the filterpaper/split_pcbs repository on GitHub, at the commit this page was made from: the board is Architeuthis dux/architeuthis_dux_custom.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Architeuthis dux custom design in my own project?
Its repository states no licence, so its author keeps all rights: ask filterpaper before reusing the design.