4 layers149.9 × 99.1 mm
4 layers69.9 × 76.2 mm
Board layout
Fijee-Project/utCSMicro transcranial current stimulation
- Size
- 69.9 × 76.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 84
- Pads
- 110
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 3
- Created
- 6 Jun 2014
- Updated
- 6 Jun 2014
Overview
Board layout is an open-source printed circuit board by Fijee-Project, from the Fijee-Project/utCS repository on GitHub. It is a 4-layer board of 69.9 × 76.2 mm with 15 parts on 84 nets.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_1 | SCREW_3mm | SCREW1, SCREW2, SCREW3, SCREW4 |
| 4 | CONN_8X2 | MOLEX_iGRID_2MM_16PIN | P2, P3, P8, P9 |
| 2 | CONN_2 | CONN_1X2_MOLEX_SL_TH | P1, P10 |
| 2 | CONN_2X2 | HEADER-2x2-SAMTEC | P7, P11 |
| 2 | CONN_5X2 | HEADER-2x5-SAMTEC | P5, P6 |
| 1 | CONN_3X2 | HEADER-2x3-SAMTEC | P4 |
More from Fijee-Project/utCS
3- 4 layers63.5 × 63.5 mm
- 4 layers69.9 × 76.2 mm
Similar boards
- 4 layers29 × 50.3 mm
Lg hvac esp32
JanM321/esphome-lg-controller
Wired controller for LG HVAC units using ESPHome and ESP32
15 parts2920BSD - 4 layers37 × 28 mm
- 4 layers33.5 × 49 mm
- 4 layers28.3 × 54 mm
- 4 layers59 × 32 mm
Cp pi if fit shield
niklasekstrom/clockport_pi_interface
Amiga clock port to Raspberry Pi interface
15 parts61GPL-3.0 - 4 layers19.5 × 10.5 mm
UniversalStepDown
RoboticsBrno/RB0005-UniversalStepDown
Universal step-down module
15 parts26CC-BY-SA-4.0 - 4 layers58.4 × 67.3 mm
Pico de gallo
OpenDevicePartnership/pico-de-gallo
A tool for testing Embedded Rust drivers for discrete I2C/SPI components.
15 parts21MIT - 4 layers114 × 52 mm
Questions
How big is the Board layout PCB?
It measures 69.9 × 76.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Board layout use?
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Board layout KiCad files?
From the Fijee-Project/utCS repository on GitHub, at the commit this page was made from: the board is hw/demux_daughterboard/kicad_proj/figuresch/board_layout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Board layout design in my own project?
Its repository states no licence, so its author keeps all rights: ask Fijee-Project before reusing the design.