
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Don't Blame Me if it Burns Your House Down - RT9525GQW LiPo charger breakout
Dbmbyhd is an open-source printed circuit board by fifteenhex, from the fifteenhex/dbmbyhd repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 16.8 × 13.6 mm with 16 parts on 15 nets, routed with 66 tracks and 7 vias.
It is built around the RT9525GQW. Its parts include 4 capacitors, 4 connectors, 3 resistors, 2 diodes and 1 IC. It belongs with the power boards of this library.
Don't Blame Me if it Burns Your House Down - RT9525GQW LiPo charger breakout

The RT9525GQW has active power path management that means the load is switched to your input source instead of the load being powered from the battery while the charger is trying to charge it. Woot!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J3 |
| 2 | Jumper_NO_Small | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | rt9525gqw | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm_ThermalVias | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 16.8 × 13.6 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the RT9525GQW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fifteenhex/dbmbyhd repository on GitHub, at the commit this page was made from: the board is dbmbyhd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).