4 layers99.6 × 76.2 mm
2 layers70 × 39 mm
RC Engine Sound Light Controller KiCad6
fiechr/RCSoundController_CrawlerPCB- Size
- 70 × 39 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 49
- Pads
- 134
- Tracks, vias
- 184, 54
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 May 2022
- Updated
- 31 Jul 2022
Overview
RC Engine Sound Light Controller KiCad6 is an open-source printed circuit board by fiechr, from the fiechr/RCSoundController_CrawlerPCB repository on GitHub. It is a 2-layer board of 70 × 39 mm with 36 parts on 49 nets, routed with 184 tracks and 54 vias.
It is built around the ULN2003. Its parts include 16 connectors, 10 resistors, 4 ICs, 3 capacitors and 1 diode. It belongs with the audio and music boards and the ESP32 boards of this library.
Main components
1Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 330Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5, R6, R7, R8, R9 |
| 2 | 10kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | Indic | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6, J7 |
| 1 | 100Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 180Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 1mF | Capacitor_THT:CP_Radial_D10.0mm_P2.50mm_P5.00mm | C2 |
| 1 | 2.2µF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 20kΩ | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 32 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | 330µF | Capacitor_Tantalum_SMD:CP_EIA-7343-30_AVX-N_Pad2.25x2.55mm_HandSolder | C1 |
| 1 | Battery input | cf:InputPowerSolderPads | J8 |
| 1 | CH1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | CH2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | CH3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | CH4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J16 |
| 1 | D_Schottky | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1 |
| 1 | ESC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | ESP32_DEVKITV1_30PIN | cf:ESP32_DEVKITV1_30PIN | U1 |
| 1 | FogL | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | HeadL | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | MP1584EN_BreakoutBoard | cf:MP1584EN_BreakoutBoard | U2 |
| 1 | PAM8403_BreakoutBoard | cf:PAM8403_NOSPEAKER_BreakoutBoard | U3 |
| 1 | RGB | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J10 |
| 1 | RX | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | RevL | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | RoofL | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | TailL | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | ULN2003 | cf:SO-16_3.9x9.9mm_P1.27mm | U4 |
The 35 most common of 36 parts.
Questions
How big is the RC Engine Sound Light Controller KiCad6 PCB?
It measures 70 × 39 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RC Engine Sound Light Controller KiCad6 use?
36 parts, built around the ULN2003. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RC Engine Sound Light Controller KiCad6 KiCad files?
From the fiechr/RCSoundController_CrawlerPCB repository on GitHub, at the commit this page was made from: the board is RC_Engine_Sound_Light_Controller_KiCad6.kicad_pcb and its schematic RC_Engine_Sound_Light_Controller_KiCad6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RC Engine Sound Light Controller KiCad6 design in my own project?
Its repository states no licence, so its author keeps all rights: ask fiechr before reusing the design.
Similar boards
- 2 layers31 × 64 mm
Power driver
jmfriedt/SDR-GB-SAR
Opensource, openhardware implementation of a Software Defined Radio (SDR) Ground Based Synthetic-Aperture RADAR (GB-SAR)
6 parts70 - 2 layers160 × 100 mm
MPCNC Nano Estlcam Shield
tnn85/MPCNC-Nano-Estlcam-Shield
Ein CNC Shield für die MPCNC in Verwendung mit Estlcam
96 parts70 - 2 layers42.5 × 43.2 mm
ElectronicFocuser
jlecomte/ascom-oag-focuser
Open Source ASCOM-Compatible OAG Focuser For Astrophotography
4 parts55MIT - 4 layers100 × 49.8 mm
- 2 layers134 × 91 mm
- 2 layers75 × 60 mm
DUTler V2
TheYoctoJester/dutler
A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.
54 parts23Apache-2.0 - 4 layers76 × 82.5 mm
Nucleo64 CNC
terjeio/CNC_Breakout_Nucleo64
CNC breakout for STM324F411 and ST32F446 development boards
120 parts22