2 layers88.9 × 87.6 mm
2 layers
Adc ad7794
fgallud/kicadmy electronics
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 40
- Pads
- 101
- Tracks, vias
- 374, 38
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Apr 2021
- Updated
- 18 Apr 2021
Overview
Adc ad7794 is an open-source printed circuit board by fgallud, from the fgallud/kicad repository on GitHub, published under the MIT licence. It is a 2-layer board with 35 parts on 40 nets, routed with 374 tracks and 38 vias.
Its parts include 12 resistors, 4 diodes, 2 inductors and 1 IC.
README
README.mdkicad
my electronics
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11, R12, R21, R22, R31, R32, R41, R42, R51, R52, R61, R62 |
| 4 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | RUP1, RUP2, RUP3, RUP4 |
| 4 | Conn_01x01 | TestPoint:TestPoint_Pad_D2.0mm | JCLK1, JPSW1, JREFNEG1, JREFPOS1 |
| 4 | D | Diode_SMD:D_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D1, D2, D3, D4 |
| 2 | 100nF ceramic | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | CA2, CD2 |
| 2 | ferrita | Inductor_SMD:L_1206_3216Metric_Pad1.42x1.75mm_HandSolder | L1, L2 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | RJUMPER1 |
| 1 | 10uF TAN | Capacitor_Tantalum_SMD:CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | CD1 |
| 1 | 10uF Tant | Capacitor_Tantalum_SMD:CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | CA1 |
| 1 | AD7794 | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U1 |
| 1 | Conn_01x03 | TerminalBlock_Altech:Altech_AK300_1x03_P5.00mm_45-Degree | JPOWER1 |
| 1 | Conn_01x04 | TerminalBlock_Altech:Altech_AK300_1x04_P5.00mm_45-Degree | JDIG1 |
| 1 | Conn_01x12 | TerminalBlock_Altech:Altech_AK300_1x12_P5.00mm_45-Degree | JIN1 |
More from fgallud/kicad
6- 2 layers
- 2 layers52 × 75 mm
- 2 layers34 × 67 mm
- 2 layers
- 2 layers
Similar boards
- 2 layers97.2 × 59.1 mm
ArmLEDsPrototype
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
35 parts915 - 2 layers62 × 42 mm
- 2 layers75 × 26 mm
DIY detector electron variant
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
35 parts558BSD-2-Clause - 2 layers45 × 25 mm
ReCamera Basically Board
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
35 parts495Apache-2.0 - 2 layers160.8 × 24.4 mm
- 2 layers75 × 50 mm
- 2 layers50 × 20.5 mm
- 2 layers50.5 × 67.1 mm
Questions
What parts does the Adc ad7794 use?
35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adc ad7794 KiCad files?
From the fgallud/kicad repository on GitHub, at the commit this page was made from: the board is adc_ad7794/adc_ad7794.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adc ad7794 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).