Skip to the content
2 layers35.6 × 26 mmTest2, the printed circuit board in 3D

After cloning the repository and installing the required software(KiCAD 6.0 and freerouting), open the plugin directory from KiCAD using the instructions included in the documentation folder and copy the source code of…

Size
35.6 × 26 mm
Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
3
Pads
6
Tracks, vias
9, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
17 May 2023
Updated
21 Oct 2023

Overview

Test2 is an open-source printed circuit board by ffharding, from the ffharding/4DPrinting-KiCAD repository on GitHub. It is a 2-layer board of 35.6 × 26 mm with 3 parts on 3 nets, routed with 9 tracks and 0 vias.

Its parts include 1 resistor and 1 diode.

README

README.md

4DPrinting KiCAD Repository

The objective of the repository is to store the files needed to implement KiCAD automating into the design flow of the 4DPrinting project, including code to automatically generate files and custom components.

Features

1. kicad-import

This features consist on the code required to import the user input such as the components chosen by the user, the desired placement of these components and the information that relate the components (what the final PCB is designed for). The output of this feature is the base KICAD file that starts the automating design flow.

2. autorouting

Autoroute the PCB created using the freerouting open source module and automate the creation of the finished PCB that will be printed.

3. xml-generator

Generate an XML file with the already finished and autorouted PCB for better data management.

4. gcode-generator

Generate GCODE from the XML file with PCB data.

Components

4DPrinting.pretty

The .pretty folder is a KiCAD library containing custom component footprints created for the base schematic of the projcet, inlcuding components designed to be printed and those components that were modified to fit the specifications of the project (through hole to surface mount components).

ComponentDescription
Battery.kicad_modFootprint for battery cell pack connected with flywires to +/- pads
MODULE_ESP-M2.kicad_modFootprint for ESP-M2 wifi chip downloaded from SnapEDA: https://www.snapeda.com/parts/ESP-M2/Doctors%20of%20Intelligence%20%26%20Technology%20Co.%2C%20LTD/view-part/?ref=search&t=%20ESP-M2%20
TPU.kicad_modFootprint for printed unit TPU
charge_port.kicad_modFootprint for 3.5mm charging port for battery
custom_lf356.kicad_modFootprint for LF356 chip converted to surface mount device
switch.kicad_modFootprint for push button switch
voltage_regulator.kicad_modFootprint for LD1117v33 voltage regulator converted to surface mount device

Installation

Clone repository into local machine using the following commmands in terminal or Git Bash:

text
git clone https://github.com/ffharding/4DPrinting-KiCAD.git

More information into Git repositories can be found on the offical Git documentation.

After cloning the repository and installing the required software(KiCAD 6.0 and freerouting), open the plugin directory from KiCAD using the instructions included in the documentation folder and copy the source code of the feature to test.

Parts

3
QtyValueFootprintReferences
12V REDLED_SMD:LED_0603_1608MetricD1
1470Resistor_SMD:R_0402_1005MetricR1
1Battery_CellBattery:BatteryHolder_Keystone_1058_1x2032BT1

More from ffharding/4DPrinting-KiCAD

1
  • 2 layers101 × 61 mmNew Official, the printed circuit board in 3D

    New Official

    ffharding/4DPrinting-KiCAD

    After cloning the repository and installing the required software(KiCAD 6.0 and freerouting), open the plugin directory from KiCAD using the instructions included in the documentation folder and copy the source code of…

    10 parts1

Similar boards

  • 2 layers40 × 30 mmBlinky, the printed circuit board in 3D

    Blinky

    earthtojake/text-to-cad

    Design physical products with AI

    3 parts26kMIT
  • 2 layers51.9 × 16 mmPassive2-rpi non standard adapter, the printed circuit board in 3D

    Passive2-rpi non standard adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    3 parts4.4kGPL-2.0
  • 2 layers16.3 × 16.3 mmSensor, the printed circuit board in 3D

    Sensor

    scottbez1/splitflap

    DIY split-flap display

    3 parts4.2k
  • 2 layersSub, the printed circuit board in 3D

    Sub

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    3 parts4kMIT
  • 2 layers85 × 30 mmDual stomp, the printed circuit board in 3D

    Dual stomp

    torvalds/GuitarPedal

    Linus learns analog circuits

    3 parts2.5kGPL-2.0
  • 2 layers124.5 × 33.7 mm172319-1 connector, the printed circuit board in 3D

    172319-1 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    3 parts1.2k
  • 2 layers10.5 × 83 mmProgrammingAdapter, the printed circuit board in 3D

    ProgrammingAdapter

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    3 parts1.1k
  • 2 layers21.2 × 51.3 mmPico reset, the printed circuit board in 3D

    Pico reset

    hackclub/sprig

    🍃 Learn to code by making games in a JavaScript web-based game editor.

    3 parts1.1kMIT

Questions

How big is the Test2 PCB?

It measures 35.6 × 26 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Test2 use?

3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Test2 KiCad files?

From the ffharding/4DPrinting-KiCAD repository on GitHub, at the commit this page was made from: the board is examples/gcode-generator/Testing Multiple Net GCODE GEN/Test2.kicad_pcb and its schematic examples/gcode-generator/Testing Complex Net GCODE GEN/Test3/Test3/Test3/Test3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Test2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask ffharding before reusing the design.