

Keyboard
WIP. A keyboard with a notebook-like layout. Using an ESP32-S3 as microcontroller.
- Size
- 324.6 × 116.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 215
- Nets
- 163
- Pads
- 885
- Tracks, vias
- 772, 41
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Jul 2023
- Updated
- 31 Oct 2026
Overview
Keyboard is an open-source printed circuit board by FelTell, from the FelTell/Keyboard-FT repository on GitHub. It is a 2-layer board of 324.6 × 116.7 mm with 215 parts on 163 nets, routed with 772 tracks and 41 vias.
It is built around the ESP32-S3-DEVKITC-1-N8 and SK6812MINI-E. Its parts include 81 diodes, 81 switches, 37 resistors, 4 connectors and 1 IC. It belongs with the keyboards and input boards and the ESP32 boards of this library.
Main components
2ESP32-S3-DEVKITC-1-N8
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
Parts
215| Qty | Value | Footprint | References |
|---|---|---|---|
| 81 | D | kbd:D3_TH_SMD_v2 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +65 |
| 70 | Key | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +54 |
| 37 | 330R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +21 |
| 6 | TestPoint | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | 3V3, 3V3-2, 5V, 5V-2, GND, GND-2 |
| 4 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | J3V1, J3V2, J5V1, J5V2 |
| 4 | Key | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.25u | S57, S71, S76, S78 |
| 3 | Stabilizer 2u | PCM_Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_2.00u | H2, H3, H4 |
| 2 | Key | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.50u | S30, S43 |
| 1 | ESP32-S3-DevKitC | PCM_Espressif:ESP32-S3-DevKitC | U1 |
| 1 | Key | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_2.25u | S56 |
| 1 | Key | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.75u | S44 |
| 1 | Key | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_2.75u | S69 |
| 1 | Key | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_6.25u | S75 |
| 1 | Key | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_2.00u | S29 |
| 1 | SK6812MINI | kbd:SK6812MINI_rev | L1 |
| 1 | Stabilizer 6.5u | PCM_Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_6.25u | H1 |
Similar boards
- 2 layers340.7 × 119.3 mm

- 2 layers65 × 90.5 mm

Pixeldust2
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
52 parts7 - 4 layers95 × 95 mm

Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0 - 2 layers129.9 × 63.6 mm

Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an
45 parts36 - 2 layers168.8 × 78.9 mm

Gameboy3
ohasanov-hbrw/tribit32-advanced
A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!
61 parts8 - 2 layers134.6 × 49.5 mm

- 2 layers90 × 102 mm

- 2 layers119.4 × 98.9 mm

PCB Pami
FIPATECH/CDFR26_PAMI
Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique
25 parts6
Questions
How big is the Keyboard PCB?
It measures 324.6 × 116.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keyboard use?
215 parts, built around the ESP32-S3-DEVKITC-1-N8 and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard KiCad files?
From the FelTell/Keyboard-FT repository on GitHub, at the commit this page was made from: the board is Hardware/Keyboard.kicad_pcb and its schematic Hardware/Keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask FelTell before reusing the design.