

Usb4butia
- Size
- 88.9 × 98.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 44
- Pads
- 204
- Tracks, vias
- 613, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 25 Nov 2016
- Updated
- 25 Nov 2016
Overview
Usb4butia is an open-source printed circuit board by fedekau, from the fedekau/butia_i2c repository on GitHub. It is a 2-layer board of 88.9 × 98.5 mm with 54 parts on 44 nets, routed with 613 tracks and 12 vias.
It is built around the PIC18F4550-I/P and RJ45. Its parts include 17 resistors, 16 connectors, 8 capacitors, 5 switches and 2 diodes. It belongs with the PIC boards of this library.
Main components
2Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10K | R3 | R3, R6, R7, R8, R9, R10, R12, R13, R15, R16, R17 |
| 6 | RJ45 | RJ45_8 | J2, J3, J4, J5, J6, J7 |
| 4 | 1pin | , , , | |
| 4 | 0,1uF | C1 | C3, C7, C8, C9 |
| 3 | CONN_2 | PIN_ARRAY_2X1 | P3, P4, P9 |
| 2 | 1K | R3 | R1, R14 |
| 2 | 22pF | C1 | C1, C2 |
| 2 | 390R | R3 | R4, R5 |
| 2 | CONN_1 | PINTST | P6, P7 |
| 2 | CONN_3 | PIN_ARRAY_3X1 | K2, K3 |
| 1 | 0,47uF | C1 | C4 |
| 1 | 100R | R3 | R11 |
| 1 | 10uF | C1V8 | C10 |
| 1 | 1M | R3 | R2 |
| 1 | 1N5819 | D5 | D2 |
| 1 | 20MHz | HC-18UV | X1 |
| 1 | AX-12 | PIN_ARRAY_3X1 | K1 |
| 1 | Bornier | bornier2 | P13 |
| 1 | CONN_2 | bornier2 | P14 |
| 1 | CONN_4 | PIN_ARRAY_2X2 | P5 |
| 1 | LED | LEDV | D1 |
| 1 | PIC18F4550 | 40DIP-ELL600 | U1 |
| 1 | PICkit2 | PIN_ARRAY_5x1 | P1 |
| 1 | PROG | SW_PUSH_SMALL | SW2 |
| 1 | RST | SW_PUSH_SMALL | SW1 |
| 1 | USB_B | USB_B | J1 |
More from fedekau/butia_i2c
5- 2 layers51.1 × 86.2 mm

- 2 layers48.6 × 86.2 mm

- 2 layers64.2 × 49.4 mm

- 2 layers35.2 × 40.5 mm

- 2 layers

Similar boards
- 2 layers

- 2 layers

- 2 layers

- 2 layers

Projeto modificado
luispaulomr/alr3000z_firmware
Firmware for ALR3000z (development board based on PIC18F4550).
68 parts - 2 layers

- 2 layers75 × 130 mm

- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 4 layers84 × 82 mm

Toad
travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.
241 parts333
Questions
How big is the Usb4butia PCB?
It measures 88.9 × 98.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Usb4butia use?
54 parts, built around the PIC18F4550-I/P and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb4butia KiCad files?
From the fedekau/butia_i2c repository on GitHub, at the commit this page was made from: the board is pcb/usb4butia/usb4butia.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb4butia design in my own project?
Its repository states no licence, so its author keeps all rights: ask fedekau before reusing the design.