2 layers50 × 50 mm
Project board grid smt
feastorg/protokit
protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing.
1,755 parts1GPL-3.0
2 layers12.7 × 7.6 mm
Input button led smd
feastorg/protokit1protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing. Designed in KiCad to support rapid electronics prototyping and customization.
- Size
- 12.7 × 7.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 8
- Pads
- 23
- Tracks, vias
- 32, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Apr 2025
- Updated
- 20 Apr 2026
Overview
Input button led smd is an open-source printed circuit board by feastorg, from the feastorg/protokit repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 12.7 × 7.6 mm with 13 parts on 8 nets, routed with 32 tracks and 0 vias.
Its parts include 4 resistors, 2 diodes, 1 capacitor and 1 switch.
README
boards/project-board-sporniket/README.mdSporniket's protoboard
[WARNING] Please read carefully this note before using this project. It contains important facts.
Content
- What is Sporniket's protoboard, and when to use it ?
- What should you know before using Sporniket's protoboard ?
- How to use Sporniket's protoboard ?
- Known issues
- Miscellanous
1. What is Sporniket's protoboard, and when to use it ?
Sporniket's protoboard is a custom prototyping board with 976 points arranged like a breadboard, that fits inside a 10cm×11cm rectangle.
This is a project designed with Kicad, version 7.
Gallery
Licence
Sporniket's protoboard is marked with CC0 1.0 Universal. To view a copy of this license, visit http://creativecommons.org/publicdomain/zero/1.0
Sporniket's protoboard is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of SAFETY, MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Releases notes
v1.0.0
- Initial release, schematics and gerbers.
2. What should you know before using Sporniket's protoboard ?
Sporniket's protoboard is designed using Kicad, version 7.
Do not use Sporniket's protoboard if this project is not suitable for your project.
3. How to use Sporniket's protoboard ?
From sources
To get the latest available models, one must clone the git repository.
git clone https://github.com/sporniket/protoboard.gitThen, open the project in Kicad.
From github releases
A github schematic only release (with schematics in the release tag and name) will provide a PDF of the schematics
A github regular release will provide :
- A standalone Kicad project
- A PDF of the schematics
- A PDF of the silkscreen
- If applicable, a Gerber for boardmanufacturer. Some details may have been adapted for a specific manufacturer.
- If applicable, a BOM, and pick an place files, likely for a specific manufacturer too.
4. Known issues
See the project issues page.
5. Miscellanous
Report issues
Use the project issues page.
Acknowledgements
Derived from: github.com/sporniket/protoboard
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | single_button-dual_LED:1X01-CLEANBIG | INNER0, INNER2, OUTER0, SIG1, UNK2 | |
| 4 | single_button-dual_LED:R805 | R1, R2, R3, R4 | |
| 2 | single_button-dual_LED:LED-805 | LED3, LED4 | |
| 1 | single_button-dual_LED:C805 | C2 | |
| 1 | single_button-dual_LED:TACTILE-PTH | S1 |
Questions
How big is the Input button led smd PCB?
It measures 12.7 × 7.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Input button led smd use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Input button led smd KiCad files?
From the feastorg/protokit repository on GitHub, at the commit this page was made from: the board is widgets/input-button-led-smd/input-button-led-smd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Input button led smd design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from feastorg/protokit
12- 2 layers17.8 × 25.4 mm
Ic soic20-tssop20-proto
feastorg/protokit
protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing.
190 parts1GPL-3.0 - 2 layers17.8 × 20.3 mm
Ic soic16-tssop16-proto
feastorg/protokit
protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing.
132 parts1GPL-3.0 - 2 layers17.8 × 20.3 mm
Ic soic16-tssop16-combo
feastorg/protokit
protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing.
104 parts1GPL-3.0 - 2 layers100 × 110 mm
Project board sporniket
feastorg/protokit
protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing.
40 parts1GPL-3.0 - 2 layers12.4 × 12.1 mm
Led-0805-5x
feastorg/protokit
protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing.
32 parts1GPL-3.0 - 2 layers17.8 × 19 mm
Conn uart matrix-6p
feastorg/protokit
protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing.
20 parts1GPL-3.0 - 2 layers12.7 × 20.3 mm
Prog atmega328-attiny isp
feastorg/protokit
protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing.
13 parts1GPL-3.0 - 2 layers17.8 × 22.9 mm
Prog attiny isp usb header
feastorg/protokit
protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing.
13 parts1GPL-3.0 - 2 layers12.7 × 15.2 mm
Conn usb ab micro vusb
feastorg/protokit
protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing.
12 parts1GPL-3.0 - 2 layers17.8 × 12.7 mm
Pwr mcp16252-boost sot23
feastorg/protokit
protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing.
12 parts1GPL-3.0 - 2 layers17.8 × 21.6 mm
Prog attiny isp
feastorg/protokit
protokit is an open-source collection of protoboards, stripboards, expansion boards, and layout boards with configured footprints and trace routing.
10 parts1GPL-3.0
Similar boards
- 2 layers40 × 20 mm
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0