
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

FuzzyFacy
FuzzFace is an open-source printed circuit board by fbernhar, from the fbernhar/pub_fuzzface repository on GitHub, published under the MIT licence. It is a 2-layer board with 21 parts on 11 nets, routed with 29 tracks and 0 vias.
Its parts include 4 resistors, 3 capacitors and 2 transistors.
The AC128.MOD file was taken from a post by KiCad forum user invntefx:
https://forum.kicad.info/t/fuzz-face-tone-bender-projects-updated-05-22-23/41450
Please note that this file may be subject to its original author’s license or usage terms.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | IN+1, OUT-1, OUT+1, P1P1, P1P2, P1P3, P2P1, P2P2, P2P3 | |
| 2 | AC128 | Package_TO_SOT_THT:TO-18-3 | Q1, Q2 |
| 1 | +9V | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | Vout+9 |
| 1 | -9V | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | Vin-9 |
| 1 | 0.01uF | Capacitor_THT:C_Radial_D6.3mm_H5.0mm_P2.50mm | C3 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 2.2uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 20uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 33K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 8.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | ~ | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | IN-1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fbernhar/pub_fuzzface repository on GitHub, at the commit this page was made from: the board is src/kicad/pcb/material/FuzzFace.kicad_pcb and its schematic src/kicad/circuit/material/FuzzFace.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).