Skip to the content
2 layers44.4 × 66 mmDoorbot esp32, the printed circuit board in 3D

ESP32 RC522 firmware for interfacing with Nexudus

Size
44.4 × 66 mm
Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
39
Pads
50
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
15 Jun 2020
Updated
11 Apr 2023

Overview

Doorbot esp32 is an open-source printed circuit board by FarsetLabs, from the FarsetLabs/doorbot-esp32 repository on GitHub, published under the MIT licence. It is a 2-layer board of 44.4 × 66 mm with 3 parts on 39 nets.

Its parts include 1 IC, 1 diode and 1 connector. It belongs with the ESP32 boards of this library.

README

README.md

doorbot-esp32

RFID Card Reader and Door Relay Opening Module for use with the doorbot project.

It's general operation is:

  • Setup Wi-Fi Connection*
  • Setup MFRC522 Card Connection
  • Loop waiting for card presence detection
  • On Card Detect, Grab the UID from the presented Card
  • Attempt to trigger an 'open' action* on the door identified by the onboard device_id, using the same device id and the UID from the presented card as the Username and Password for HTTP Basic Auth
  • If 200 response; flash green on RGB LED and unlock door via relay for 5 seconds
  • Otherwise flash red for 5 seconds and resume loop

*Configured through build-time environment variables, see platform.ini for details

Hardware Setup

This project uses an ESP-WROOM-32 package, an RC522 RFID module

ESP32 Pinout

RC522 Pinout

Pin Mappings:

RC522 -> ESP32
RC522ESP32Description
3v33v3VIN
RSTD22Reset
GNDGNDGround
IRQUnused
MISOD19SPI Master Input
MOSID23SPI Master Output
SCKD18SPI Clock
SDAD21Serial Data Line
RGB LED -> ESP32
RGB LEDESP32Description
(-)GNDGround
RD2Red
GD4Green
BBlue
RELAY -> ESP32
RELAYESP32
NOD15Normally Open (Actuator)
+3v3+VE
-GNDGround

Parts

3
QtyValueFootprintReferences
1ESP32-DEVKITC-32Dboard:MODULE_ESP32-DEVKITC-32DU1
1LED_ARBGConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalD1
1RFID-RC522Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1

Similar boards

  • 2 layers40 × 30 mmBlinky, the printed circuit board in 3D

    Blinky

    earthtojake/text-to-cad

    Design physical products with AI

    3 parts26kMIT
  • 2 layers51.9 × 16 mmPassive2-rpi non standard adapter, the printed circuit board in 3D

    Passive2-rpi non standard adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    3 parts4.4kGPL-2.0
  • 2 layers16.3 × 16.3 mmSensor, the printed circuit board in 3D

    Sensor

    scottbez1/splitflap

    DIY split-flap display

    3 parts4.2k
  • 2 layersSub, the printed circuit board in 3D

    Sub

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    3 parts4kMIT
  • 2 layers85 × 30 mmDual stomp, the printed circuit board in 3D

    Dual stomp

    torvalds/GuitarPedal

    Linus learns analog circuits

    3 parts2.5kGPL-2.0
  • 2 layers124.5 × 33.7 mm172319-1 connector, the printed circuit board in 3D

    172319-1 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    3 parts1.2k
  • 2 layers10.5 × 83 mmProgrammingAdapter, the printed circuit board in 3D

    ProgrammingAdapter

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    3 parts1.1k
  • 2 layers21.2 × 51.3 mmPico reset, the printed circuit board in 3D

    Pico reset

    hackclub/sprig

    🍃 Learn to code by making games in a JavaScript web-based game editor.

    3 parts1.1kMIT

Questions

How big is the Doorbot esp32 PCB?

It measures 44.4 × 66 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Doorbot esp32 use?

3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Doorbot esp32 KiCad files?

From the FarsetLabs/doorbot-esp32 repository on GitHub, at the commit this page was made from: the board is board/board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Doorbot esp32 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).