
Pcb SX1509
fanningert/kicad_pcb_ioexpander
PCBto extend IO ports via I²C. Changes are only made on my private Git-Server and are pushed to GitHub. Issues on Github are wellcome.

PCBto extend IO ports via I²C. Changes are only made on my private Git-Server and are pushed to GitHub. Issues on Github are wellcome.
Pcb PCA9685 is an open-source printed circuit board by fanningert, from the fanningert/kicad_pcb_ioexpander repository on GitHub. It is a 4-layer board of 18.3 × 25.9 mm with 47 parts on 29 nets, routed with 227 tracks and 36 vias.
Its parts include 24 connectors, 9 resistors, 1 capacitor and 1 IC.
Core goal is a pcb with the same pin outs, but with different i²C IO Expander. Castellated holes with secondary pin header holes are added, for direct PCB soldering. Secondary pin header holes are placed in a matrix of 2,54 mm (100 mils). Because of the fixed pin layout of the pcb, I created the boards in a four layer design.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | ~ | Castellated_Holes:Castellated_Hole02 | J1, J2, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J23, J28, J29 +8 |
| 9 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 7 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7 |
| 4 | Tab | PCM_kikit:Tab | T1, T2, T3, T4 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | PCA9685PW,118 | library:SOP65P640X110-28N | IC1 |
| 1 | https://github.com/fanningert/kicad_pcb_ioexpander | https://github.com/fanningert/kicad_pcb_ioexpander | QR***** |

fanningert/kicad_pcb_ioexpander
PCBto extend IO ports via I²C. Changes are only made on my private Git-Server and are pushed to GitHub. Issues on Github are wellcome.

EPFLXplore/XRE_LeggedRobot_HW
PCB designs for Xplore Research's robot dog project


loudifier/OpenRefMic
open hardware design for a high-performance low-cost measurement microphone




rjwalters/kicad-tools
Standalone Python tools for parsing and manipulating KiCad schematic and PCB files

It measures 18.3 × 25.9 mm and has 4 copper layers, 1.6 mm thick.
47 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fanningert/kicad_pcb_ioexpander repository on GitHub, at the commit this page was made from: the board is pcb_PCA9685/project.kicad_pcb and its schematic pcb_PCA9685/project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask fanningert before reusing the design.