
Base
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A very cool blend of a fuzz and an octave effect.
FnS Americano V2.0 is an open-source printed circuit board by FandSonthesizer, from the FandSonthesizer/Americano repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 51.1 × 81 mm with 43 parts on 27 nets, routed with 335 tracks and 10 vias.
Its parts include 20 resistors, 9 capacitors, 5 transistors, 5 connectors and 4 diodes.
A very cool blend of a fuzz and an octave effect.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | NilsLib:Widerstand_liegend | R6, R7, R12 |
| 3 | 22k | NilsLib:Widerstand_liegend | R10, R11, R20 |
| 3 | 47n | NilsLib:Kondensator_Keramik | C1, C3, C4 |
| 3 | BC549 | NilsLib:TO-92_Wide_NIK | Q1, Q3, Q4 |
| 2 | 100k | Potis:Potentiometer_Alps_RK09K_Single_Vertical | P1, P3 |
| 2 | 1N4148 | NilsLib:Diode_Horizontal | D2, D3 |
| 2 | 6,2k | NilsLib:Widerstand_liegend | R5, R19 |
| 2 | 68k | NilsLib:Widerstand_liegend | R8, R9 |
| 1 | 1,2k | NilsLib:Widerstand_liegend | R18 |
| 1 | 1,5M | NilsLib:Widerstand_liegend | R1 |
| 1 | 10 | NilsLib:Widerstand_liegend | R14 |
| 1 | 100k | NilsLib:Widerstand_liegend | R17 |
| 1 | 100n | NilsLib:Kondensator_Keramik | C5 |
| 1 | 100p | NilsLib:Kondensator_Keramik | C7 |
| 1 | 100u | NilsLib:Elko_D6.3mm_P2.50mm | C2 |
| 1 | 10n | NilsLib:Kondensator_Keramik | C9 |
| 1 | 160k | NilsLib:Widerstand_liegend | R3 |
| 1 | 18k | NilsLib:Widerstand_liegend | R4 |
| 1 | 1M | NilsLib:Widerstand_liegend | R15 |
| 1 | 1N4001 | NilsLib:Diode_Horizontal | D1 |
| 1 | 1k | Potis:Potentiometer_Piher_T-16L_Single_Vertical_Hole | P2 |
| 1 | 220n | NilsLib:Kondensator_Keramik | C6 |
| 1 | 22u | NilsLib:Elko_D6.3mm_P2.50mm | C8 |
| 1 | 2N3904 | NilsLib:TO-92_Wide_NIK | Q5 |
| 1 | 2N3906 | NilsLib:TO-92_Wide_NIK | Q2 |
| 1 | 33k | NilsLib:Widerstand_liegend | R16 |
| 1 | 47k | NilsLib:Widerstand_liegend | R13 |
| 1 | 560k | NilsLib:Widerstand_liegend | R2 |
| 1 | LED | NilsLib:LED_Vertikal | D4 |
| 1 | Power | NilsLib:Stift_x02 | J1 |
| 1 | fp | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

rusefi/rusefi
rusefi - GPL internal combustion engine control unit


jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository


tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
It measures 51.1 × 81 mm and has 2 copper layers, 1.6 mm thick.
43 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FandSonthesizer/Americano repository on GitHub, at the commit this page was made from: the board is FnS_Americano_V2.0/FnS_Americano_V2.0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).