
Ikoka nano meshtastic device
ndoo/ikoka-nano-meshtastic-device
A Meshtastic device based on the Seeed Studio XIAO nRF52840 and EBYTE E22-XXXMXXS series LoRa modules. Pinout matches the Meshtastic xiaoble variant.

Smallest keyboard format possible with cheap STM32F103C8T6 microcontroller
Bluepill 40P Keyboard is an open-source printed circuit board by fallingdowncat, from the fallingdowncat/40-Keyboard-with-STM32-Bluepill repository on GitHub, published under the MIT licence. It is a 2-layer board of 228.6 × 84.2 mm with 107 parts on 89 nets, routed with 817 tracks and 78 vias.
It is built around the STM32F103C8T6, DSK26 and USBLC6-2SC6Y. Its parts include 40 diodes, 40 switches, 12 capacitors, 6 resistors and 2 ICs. It belongs with the keyboards and input boards and the STM32 boards of this library.
Smallest keyboard format possible with cheap STM32F103C8T6 microcontroller
Bluepill 40P Keyboard.kicad_pcb - PCB layoutBluepill 40P Keyboard.kicad_sch - SchematicBluepill 40P Keyboard.kicad_pro - Project file#Preview
| Designator | Value / Description | LCSC Part Number |
|---|---|---|
| STM32F103C8T6 | Microcontroller | C8734 |
| USB_C_Receptacle_USB2.0_16P | USB Receptacle | C393939 |
| MCP1700T-3302E/TT | Voltage Regulator | C39051 |
| USBLC6-2SC6Y | USB ESD Protection | C5310974 |
| Conn_01x04_Pin | 4-Pin Header (mounting holes only) | — |
| ABM3-8.000MHz | 8 MHz Crystal | C144380 |
| DSK26 | Schottky Diode | C50553 |
| SW_Push (×40) | Keyboard Switches | Any Cherry MX compatible |
| SW_Push | Reset Button | C720477 |
| D1–D40 | Keyboard Diodes | C83528 |
| C1, C2, C6 | 1µF Capacitor | C215803 |
| C3, C4 | 27pF Capacitor | C1808 |
| C5 | 10µF Capacitor | C15850 |
| C7, C10, C13 | 4.7µF Capacitor | C1779 |
| C8, C9, C11 | 100nF Capacitor | C1711 |
| R2, R7 | 100kΩ Resistor | C149504 |
| R3, R4 | 5.1kΩ Resistor (CC pull-down) | C114539 |
| R5, R6 | 22Ω Resistor (USB D+/D−) | C2907310 |
The schematic should technically work, but still not tested by printing the actual PCB board. When PCB arrives, this part of the post will be edited.
This project is licensed under the MIT license
| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | D | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +24 |
| 32 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.00u | SW1, SW2, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW25, SW26 +16 |
| 5 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.25u | SW13, SW33, SW35, SW39, SW40 |
| 3 | 100n | PCM_JLCPCB:C_0805 | C8, C9, C11 |
| 3 | 1u | PCM_JLCPCB:C_0805 | C1, C2, C6 |
| 3 | 4.7u | PCM_JLCPCB:C_0805 | C7, C10, C13 |
| 2 | 100k | PCM_JLCPCB:R_0805 | R2, R7 |
| 2 | 22 | PCM_JLCPCB:R_0805 | R5, R6 |
| 2 | 27p | PCM_JLCPCB:C_0805 | C3, C4 |
| 2 | 5.1k | PCM_JLCPCB:R_0805 | R3, R4 |
| 2 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.75u | SW23, SW24 |
| 1 | 10u | PCM_JLCPCB:C_0805 | C5 |
| 1 | ABM3-8.000MHZ | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | DSK26 | PCM_JLCPCB:D_SOD-123FL | DD24 |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | STM32F103C8T6 | PCM_JLCPCB:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SW_Push | KiCAD footprints:SW_TS-1088-AR02016 | SWW1 |
| 1 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_6.25u | SW38 |
| 1 | USBLC6-2SC6Y | KiCAD footprints:SOT95P280X145-6N | DD2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
The 106 most common of 107 parts.

ndoo/ikoka-nano-meshtastic-device
A Meshtastic device based on the Seeed Studio XIAO nRF52840 and EBYTE E22-XXXMXXS series LoRa modules. Pinout matches the Meshtastic xiaoble variant.

KokoSoft/BirbMesh-One
Compact 1 W Meshtastic node based on the nRF52840 ProMicro. Multiple configuration options, proper power-supply design, optional LCD, battery monitoring, and support for E22(M), Ra‑01SH‑P, and HT‑RA62 radio modules.

DevCyclonekitten/Bambu-A1-Klipper
A repository about the development of modifying a bambu labs a1 printer to run on klipper

YuriySm/Ikoka-NanoX-Meshtastic-Device
Small 1W LoRA on Seeed Studio XIAO nRF52840 PCB for Meshtastic (fork of Ikoka Nano)


MostlyBuilds/speaker-pod-pcb
This is a PCB design for an ESP32-based speaker controller

zPirroZ3007/devboard
Breadboard-friendly STM32F411 development board with USB-C support.

It measures 228.6 × 84.2 mm and has 2 copper layers, 1.6 mm thick.
107 parts, built around the STM32F103C8T6, DSK26 and USBLC6-2SC6Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fallingdowncat/40-Keyboard-with-STM32-Bluepill repository on GitHub, at the commit this page was made from: the board is Bluepill 40P Keyboard.kicad_pcb and its schematic Bluepill 40P Keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).