Skip to the content
2 layers95.5 × 58 mmMacro pad, the printed circuit board in 3D
Size
95.5 × 58 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
20
Pads
60
Tracks, vias
67, 11
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
31 Aug 2026
Updated
2 Sep 2026

Overview

Macro pad is an open-source printed circuit board by Faisal-Saqib, from the Faisal-Saqib/macro-pad repository on GitHub, published under the MIT licence. It is a 2-layer board of 95.5 × 58 mm with 14 parts on 20 nets, routed with 67 tracks and 11 vias.

Its parts include 6 diodes, 6 switches and 2 ICs. It belongs with the keyboards and input boards of this library.

Parts

14
QtyValueFootprintReferences
61N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4, D5, D6
6SW_Push_45degButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6
1ER_OLEDM0.91_1x-I2CKiCad-SSD1306-0.91-OLED-4pin-128x32:SSD1306-0.91-OLED-4pin-128x32U2
1MOUDLE-SEEEDUINO-XIAOfootprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MMU1

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Macro pad PCB?

It measures 95.5 × 58 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Macro pad use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Macro pad KiCad files?

From the Faisal-Saqib/macro-pad repository on GitHub, at the commit this page was made from: the board is macro-pad/macro-pad.kicad_pcb and its schematic macro-pad/macro-pad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Macro pad design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).