Skip to the content
2 layers36 × 29.9 mmCircuito Carlassara, the printed circuit board in 3D

Circuito Carlassara

Facu186/requisitos-de-cierre

En el directorio Hardware encontraremos el circuito esquematico, el PCB y y los datasheets de los elementos utilizados para nuestro proyecto.

Size
36 × 29.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
44
Pads
54
Tracks, vias
35, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
1 Dec 2024
Updated
2 Dec 2024

Overview

Circuito Carlassara is an open-source printed circuit board by Facu186, from the Facu186/requisitos-de-cierre repository on GitHub. It is a 2-layer board of 36 × 29.9 mm with 4 parts on 44 nets, routed with 35 tracks and 0 vias.

It is built around the DHT11. Its parts include 2 ICs, 1 resistor and 1 connector. It belongs with the RP2040 boards of this library.

Main components

1

README

hardware/README.md

En el directorio Hardware encontraremos el circuito esquematico, el PCB y y los datasheets de los elementos utilizados para nuestro proyecto.

Parts

4
QtyValueFootprintReferences
15KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU1
1PicoConnector_PinHeader_1.00mm:PinHeader_2x22_P1.00mm_VerticalU2
1Screw_Terminal_01x04TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_HorizontalJ2

Similar boards

  • 2 layers96.6 × 82.8 mmStarbie, the printed circuit board in 3D

    Starbie

    SharKingStudios/Starbie

    Half-Life Week 1 Example Project

    11 parts28MIT
  • 2 layers100 × 50 mmConveyor belt pcb, the printed circuit board in 3D

    Conveyor belt pcb

    lansidev/conveyor-belt

    Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi

    22 parts9MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers62 × 19.3 mmSniffingTrinket, the printed circuit board in 3D

    SniffingTrinket

    GeorgK/SniffingTrinket

    A room climate monitor using the Adafruit Trinket Pro

    23 parts6GPL-3.0
  • 2 layersArduino relay, the printed circuit board in 3D

    Arduino relay

    bhaskar9980/Guardian

    Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

    58 parts5MIT
  • 2 layers100 × 43.5 mmFirefly, the printed circuit board in 3D

    Firefly

    Twistx77/Firefly

    Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

    33 parts5GPL-3.0
  • 2 layers30.5 × 77.5 mmProyecto sensor temperatura, the printed circuit board in 3D

    Proyecto sensor temperatura

    unla-investigacion-desarrollo/ecosistema-iot

    Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:

    8 parts5

Questions

How big is the Circuito Carlassara PCB?

It measures 36 × 29.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Circuito Carlassara use?

4 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Circuito Carlassara KiCad files?

From the Facu186/requisitos-de-cierre repository on GitHub, at the commit this page was made from: the board is hardware/Circuito Carlassara.kicad_pcb and its schematic hardware/Circuito Carlassara.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Circuito Carlassara design in my own project?

Its repository states no licence, so its author keeps all rights: ask Facu186 before reusing the design.