2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers11 × 13 mm
Usb c usb2
facelesstech/usb_2_usb_c_pcb1- Size
- 11 × 13 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 6
- Pads
- 24
- Tracks, vias
- 42, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Jan 2024
- Updated
- 14 Jan 2024
Overview
Usb c usb2 is an open-source printed circuit board by facelesstech, from the facelesstech/usb_2_usb_c_pcb repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 11 × 13 mm with 7 parts on 6 nets, routed with 42 tracks and 0 vias.
Its parts include 2 resistors and 1 connector.
README
README.mdusb_2_usb_c_pcb
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TestPoint | custom_connectors:1mm_test_point_square | -, +, D-, D+ |
| 2 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | USB_C_Plug | usb_custom:USB_C_SMD_USB2 | P1 |
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
Questions
How big is the Usb c usb2 PCB?
It measures 11 × 13 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Usb c usb2 use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb c usb2 KiCad files?
From the facelesstech/usb_2_usb_c_pcb repository on GitHub, at the commit this page was made from: the board is kicad7_files/usb_c_usb2/usb_c_usb2.kicad_pcb and its schematic kicad7_files/usb_c_usb2/usb_c_usb2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb c usb2 design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).