2 layers67.7 × 99.4 mm
2 layers67.7 × 99.4 mm
Retro zero front
facelesstech/retro_zero_handheld4retro_zero_handheld
- Size
- 67.7 × 99.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 50
- Pads
- 92
- Tracks, vias
- 223, 35
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Apr 2019
- Updated
- 6 Apr 2019
Overview
Retro zero front is an open-source printed circuit board by facelesstech, from the facelesstech/retro_zero_handheld repository on GitHub. It is a 2-layer board of 67.7 × 99.4 mm with 20 parts on 50 nets, routed with 223 tracks and 35 vias.
Its parts include 10 switches, 6 ICs, 1 resistor and 1 connector. It belongs with the retro computing and games boards of this library.
README
README.mdretro_zero_handheld
retro_zero_handheld
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | SW_Push | buttons_custom:smd_soft_custom | SW2, SW3, SW4, SW5, SW7, SW8, SW9, SW10, SW11, SW12 |
| 4 | m3_standsoffs | m3_hole_custom:m3_hole_custom | U3, U4, U5, U6 |
| 2 | Speaker | speakers:piezo_smd | LS1, LS2 |
| 1 | 2.4_screen_ribbon | screens:2.4_screen_ribbon_breakout | U1 |
| 1 | LRandPower | LRandPower:LRandPower | U2 |
| 1 | R | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | Raspberry_Pi_2_3 | raspberry_pi_gpio_custom:raspberry_pi_gpio_smd_outline_custom | J1 |
More from facelesstech/retro_zero_handheld
1Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the Retro zero front PCB?
It measures 67.7 × 99.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Retro zero front use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Retro zero front KiCad files?
From the facelesstech/retro_zero_handheld repository on GitHub, at the commit this page was made from: the board is kicad_board_files/retro_zero_front/retro_zero_front.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Retro zero front design in my own project?
Its repository states no licence, so its author keeps all rights: ask facelesstech before reusing the design.