2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers22.8 × 8.3 mm
Ipod usb c mod
facelesstech/ipod_usb_c_charge_and_sync16ipod_usb_c_charge_and_sync
- Size
- 22.8 × 8.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 9
- Pads
- 35
- Tracks, vias
- 54, 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Oct 2023
- Updated
- 9 Dec 2023
Overview
Ipod usb c mod is an open-source printed circuit board by facelesstech, from the facelesstech/ipod_usb_c_charge_and_sync repository on GitHub. It is a 2-layer board of 22.8 × 8.3 mm with 10 parts on 9 nets, routed with 54 tracks and 2 vias.
Its parts include 2 resistors, 1 connector and 1 switch.
README
README.mdParts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TestPoint | custom_connectors:1mm_test_point_square_SMD | D-, D+, GND, VCC |
| 2 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | TestPoint | custom_connectors:2mm_4mm_test_point_SMD | TP5, TP6 |
| 1 | SW_DPDT_x2 | buttons_custom:even_tinier_smd_slide_switch_custom | SW1 |
| 1 | USB_C_Plug | usb_custom:USB_C_SMD_USB2 | P2 |
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the Ipod usb c mod PCB?
It measures 22.8 × 8.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ipod usb c mod use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ipod usb c mod KiCad files?
From the facelesstech/ipod_usb_c_charge_and_sync repository on GitHub, at the commit this page was made from: the board is kicad_files/ipod_usb_c_mod/ipod_usb_c_mod.kicad_pcb and its schematic kicad_files/ipod_usb_c_mod/ipod_usb_c_mod.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ipod usb c mod design in my own project?
Its repository states no licence, so its author keeps all rights: ask facelesstech before reusing the design.