
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

A wearable platform built on a nato watch strap with a attiny85 and powered by a CR2032 coin cell. I used a tilt sensor as a button that turns each LED on in turn.
Wearable is an open-source printed circuit board by facelesstech, from the facelesstech/attiny85_wearable_concept repository on GitHub. It is a 2-layer board of 29.7 × 47 mm with 12 parts on 14 nets, routed with 54 tracks and 6 vias.
Its parts include 4 resistors, 4 diodes, 2 ICs and 1 switch. It belongs with the wearables boards and the AVR (ATmega, ATtiny) boards of this library.
A wearable platform built on a nato watch strap with a attiny85 and powered by a CR2032 coin cell. I used a tilt sensor as a button that turns each LED on in turn.
Blog post - https://facelesstech.wordpress.com/2018/04/29/attiny-wearable/ Youtube - https://www.youtube.com/watch?v=YOjYC2ICE18
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LED | LEDs:LED_1206 | D1, D2, D3, D4 |
| 4 | R | Resistors_SMD:R_1206 | R1, R2, R3, R4 |
| 1 | ATTINY85-P | Housings_DIP:DIP-8_W7.62mm | IC1 |
| 1 | Battery_Cell | Battery_Holders:Keystone_3034_1x20mm-CoinCell | BT1 |
| 1 | SWITCH_INV | buttons_custom:switch_6pin_smd_custom | SW1 |
| 1 | tilt_ball_custom | ball_tilt_custom:ball_tilt_custom | U1 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 29.7 × 47 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the facelesstech/attiny85_wearable_concept repository on GitHub, at the commit this page was made from: the board is board_files/wearable_concept/wearable.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask facelesstech before reusing the design.