Skip to the content
2 layers76.9 × 77 mmArdubigboy, the printed circuit board in 3D

ardubigboy_sp

Size
76.9 × 77 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
42
Pads
112
Tracks, vias
356, 44
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
26 Jan 2021
Updated
26 Jan 2021

Overview

Ardubigboy is an open-source printed circuit board by facelesstech, from the facelesstech/ardubigboy_sp repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 76.9 × 77 mm with 28 parts on 42 nets, routed with 356 tracks and 44 vias.

Its parts include 13 ICs, 9 switches and 4 resistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

ardubigboy_sp

ardubigboy_sp

Parts

28
QtyValueFootprintReferences
7SW_Pushbuttons_custom:dome_buttons_customSW1, SW2, SW3, SW4, SW5, SW6, SW7
5m3_standsoffsM4_custom:M4.5_customU8, U9, U10, U11, U12
4RResistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR1, R2, R3, R4
1
12n2222_smdtransistor_custom:SOT-23_customU1
1ProMicropromicro:ProMicro_smd_padsU3
1SW_Push_SPDTbuttons_custom:3_pin_switch_smd_side_mountSW9
1SW_Push_SPDTbuttons_custom:tiny_smd_slide_switch_adjustableSW8
1Speakerspeakers:piezo_smdLS1
1USB_C_lipo_charger_custompower_bank_boards:USB_C_SMD_lipo_charger_customU7
1battery_custombattery_connector_custom:vcc_gnd_2pin_customU6
1ssd1309_2.42_customscreens:ssd1309_2.42_custom_headersU5
1tiny_boost_custompower_bank_boards:Tiny_boost_orange_smdU4
1usb_c_6pinusb_custom:USB_C_6PIN_customU13
1w25q128w25q128:W25Q128_smd_customU2

Similar boards

  • 2 layers44.5 × 72.7 mmOSO SWAT C1-jig, the printed circuit board in 3D

    OSO SWAT C1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    28 parts2.1k
  • 2 layers95 × 54 mmEinkPDA screen, the printed circuit board in 3D

    EinkPDA screen

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    28 parts2kApache-2.0
  • 2 layers45 × 45 mmSmartbuttons, the printed circuit board in 3D

    Smartbuttons

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    28 parts915
  • 2 layers24.1 × 36.2 mmEsp32miniBT, the printed circuit board in 3D

    Esp32miniBT

    asterics/esp32_mouse_keyboard

    ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)

    28 parts911GPL-3.0
  • 2 layers34.8 × 12.2 mmInfnoise goldfingers, the printed circuit board in 3D

    Infnoise goldfingers

    waywardgeek/infnoise

    The world's easiest TRNG to get right

    28 parts854CC0-1.0
  • 2 layers55.9 × 99.1 mmStm32f0 disco Luos shield, the printed circuit board in 3D

    Stm32f0 disco Luos shield

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    28 parts546MIT
  • 2 layers88 × 25 mmEleLab v2 Frontpanel a, the printed circuit board in 3D

    EleLab v2 Frontpanel a

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    28 parts531GPL-3.0

Questions

How big is the Ardubigboy PCB?

It measures 76.9 × 77 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ardubigboy use?

28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ardubigboy KiCad files?

From the facelesstech/ardubigboy_sp repository on GitHub, at the commit this page was made from: the board is kicad_files/ardubigboy.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ardubigboy design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).