Skip to the content
2 layers35 × 45 mmTempsys, the printed circuit board in 3D

Kicad hardware design for the tempsys board

Size
35 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
42
Pads
85
Tracks, vias
102, 7
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
21 Aug 2024
Updated
2 Sep 2025

Overview

Tempsys is an open-source printed circuit board by fabiojmendes, from the fabiojmendes/tempsys-hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 35 × 45 mm with 19 parts on 42 nets, routed with 102 tracks and 7 vias.

It is built around the E73-2G4M08S1CX. Its parts include 3 capacitors, 3 resistors, 3 connectors, 1 IC and 1 switch.

Main components

1

README

README.md

Tempsys hardware

Kicad hardware design for the Tempsys board.

Block diagram

Tempsys Block Diagram

Schematics

The board is built around the E73-2G4M08S1C module that relies on the nRF52840 chip from Nordic. The hardware design is minimalistic to avoid any unnecessary power draw.

In short:

  • An external XTAL is used to further reduce power consumption.
  • Pull-up resistors on the i2c bus.
  • Programming headers are provided.
  • Reset button.
  • Extra GPIO headers if necessary.
  • CR-2032 battery holder.

Schematics

PCB

PCB Top PCB Bottom

Assembled product

Slightly older version of the PCB without the pull-up resistors.

PCB Assembled

Current draw

The hardware is optimized to sip as little power as possible. Thanks to the Nordic low power capabilities this device runs for more than a year on a single coin cell battery CR-2032. In idle it consumes only ~3uA, and around 250uA when the Bluetooth radio is engaged.

From the firmware perspective, all devices are set to sleep when not in use and the advertising rate for the Bluetooth LE is stretched as much as possible.

Current Draw

Parts

19
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_ISO7380_PadH1, H2, H3, H4
310kResistor_SMD:R_0402_1005MetricR1, R2, R3
212pFCapacitor_SMD:C_0402_1005MetricC2, C3
1100nFCapacitor_SMD:C_0402_1005MetricC1
16P4CTempsys:438600003J1
1Battery_CellTempsys:CR2032-BS-6-1BT1
1CrystalCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
1E73-2G4M08S1CXTempsys2:E73(2G4M08S1C)U1
1ResetButton_Switch_SMD:SW_Push_1P1T_XKB_TS-1187ASW1
1SCLJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1SDAJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP2
1gpioConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1progConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2

Similar boards

  • 2 layers43.9 × 27.7 mmTcd1304-4v, the printed circuit board in 3D

    Tcd1304-4v

    OpnTec/open-spectrometer-hardware

    Open source VIS spectrometer

    19 parts1.5k
  • 2 layers50 × 60 mmDebate Device, the printed circuit board in 3D

    Debate Device

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    19 parts915
  • 2 layers102.9 × 96.7 mmISA adapter, the printed circuit board in 3D

    ISA adapter

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    19 parts805
  • 2 layers60 × 39 mmPs2usb, the printed circuit board in 3D

    Ps2usb

    rasteri/HIDman

    Adapting USB devices to work on old computers

    19 parts432
  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 2 layers80 × 80 mmGB BRK CPU G1, the printed circuit board in 3D

    GB BRK CPU G1

    Gekkio/gb-hardware

    Game Boy -related custom hardware by gekkio

    19 parts379CC-BY-4.0
  • 2 layers25.4 × 25.4 mmIna169, the printed circuit board in 3D

    Ina169

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    19 parts282
  • 2 layers58.4 × 28.6 mmNew rele, the printed circuit board in 3D

    New rele

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    19 parts269

Questions

How big is the Tempsys PCB?

It measures 35 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tempsys use?

19 parts, built around the E73-2G4M08S1CX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tempsys KiCad files?

From the fabiojmendes/tempsys-hardware repository on GitHub, at the commit this page was made from: the board is Tempsys.kicad_pcb and its schematic Tempsys.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tempsys design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).