

Kicad hardware design for the tempsys board
- Size
- 35 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 42
- Pads
- 85
- Tracks, vias
- 102, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Aug 2024
- Updated
- 2 Sep 2025
Overview
Tempsys is an open-source printed circuit board by fabiojmendes, from the fabiojmendes/tempsys-hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 35 × 45 mm with 19 parts on 42 nets, routed with 102 tracks and 7 vias.
It is built around the E73-2G4M08S1CX. Its parts include 3 capacitors, 3 resistors, 3 connectors, 1 IC and 1 switch.
Main components
1README
README.mdTempsys hardware
Kicad hardware design for the Tempsys board.
Block diagram
Schematics
The board is built around the E73-2G4M08S1C module that relies on the nRF52840 chip from Nordic. The hardware design is minimalistic to avoid any unnecessary power draw.
In short:
- An external XTAL is used to further reduce power consumption.
- Pull-up resistors on the i2c bus.
- Programming headers are provided.
- Reset button.
- Extra GPIO headers if necessary.
- CR-2032 battery holder.

PCB

Assembled product
Slightly older version of the PCB without the pull-up resistors.

Current draw
The hardware is optimized to sip as little power as possible. Thanks to the Nordic low power capabilities this device runs for more than a year on a single coin cell battery CR-2032. In idle it consumes only ~3uA, and around 250uA when the Bluetooth radio is engaged.
From the firmware perspective, all devices are set to sleep when not in use and the advertising rate for the Bluetooth LE is stretched as much as possible.

Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 6P4C | Tempsys:438600003 | J1 |
| 1 | Battery_Cell | Tempsys:CR2032-BS-6-1 | BT1 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | E73-2G4M08S1CX | Tempsys2:E73(2G4M08S1C) | U1 |
| 1 | Reset | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | SCL | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | SDA | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2 |
| 1 | gpio | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | prog | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
Similar boards
- 2 layers43.9 × 27.7 mm

- 2 layers50 × 60 mm

Debate Device
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
19 parts915 - 2 layers102.9 × 96.7 mm

ISA adapter
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
19 parts805 - 2 layers60 × 39 mm

- 2 layers70.1 × 43.2 mm

Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers80 × 80 mm

- 2 layers25.4 × 25.4 mm

Ina169
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
19 parts282 - 2 layers58.4 × 28.6 mm

New rele
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
19 parts269
Questions
How big is the Tempsys PCB?
It measures 35 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tempsys use?
19 parts, built around the E73-2G4M08S1CX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tempsys KiCad files?
From the fabiojmendes/tempsys-hardware repository on GitHub, at the commit this page was made from: the board is Tempsys.kicad_pcb and its schematic Tempsys.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tempsys design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).