Skip to the content
4 layers28.8 × 25.4 mmTmc 2300 standalone bob, the printed circuit board in 3D

Tmc 2300 standalone bob

fabianmuehlberger/OpenValve19

open source smarthome radiator thermostat

Size
28.8 × 25.4 mm
Copper layers
4
Thickness
1.6 mm
Parts
35
Nets
29
Pads
99
Tracks, vias
166, 51
Pours
15
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
7 Sep 2022
Updated
3 Jan 2024

Overview

Tmc 2300 standalone bob is an open-source printed circuit board by fabianmuehlberger, from the fabianmuehlberger/OpenValve repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 28.8 × 25.4 mm with 35 parts on 29 nets, routed with 166 tracks and 51 vias.

It is built around the TMC2300-LA-T. Its parts include 12 resistors, 4 capacitors, 4 connectors, 2 diodes and 1 IC. It belongs with the home automation and IoT boards of this library.

Main components

1

README

README.md

OpenValve

open source smarthome radiator thermostat

This project has the goal of developing an open source smarthome valve for radiators.

IDEA

  • Using “off the shelf” components and 3D printed parts for easy building
  • keep the cost at a minimum
  • allow programming via common environments (ESP-IDF, ESPHome)
  • integration into smarthome with ESPHome and Home Assistant

COMPONENTS

  • Linear Stepper Motor for smart radiator valve
  • 3D printed parts
  • PCB
    • ESP32 based board (esp32-c6 or esp32-c3)
    • stepper driver TMC 2300
    • Battery management/ voltage regulator

Mechanical design

The general idea is to make the mechanical Assembly and the program as simple as possible, to make it accessible and easy to work with. This is the premise for all design decisions

Radiator Valve

(standard radiator valve, used in Austria) this sort of valve has a pin with ~2.5mmm travel, this allows for a controlled liquid flow depending on the distance. To make the SmartValve adjustable, a mechanism is needed to control the pin in that region.

Motor / Drive

The current development uses a geared stepper motor with 10:1 ration and a linear travel of ~ 5mm. The stepper is designed for this application.

3D printed parts

OpenValve is designed to have 3d printed parts that are printable with a standard FTM printer with no supports and assembled with m3 bolts and buts.

OnShape is used for the projecrt for easy collaboration and versioning.

SOFTWARE

  • For easy integration in Home Assistant, the project is written in Arduino framework, this makes it possible to compile it as a ESPHome device

TODO

Prove of concept

  • 3D printed parts
  • Arduino test sketch

Prototype

  • PCB design
    • Schematic design
    • Part selection for PCB
    • PCB layout and Design
    • PCB ordered
  • Prototype built
  • Prototype tested
  • prototype documentation

Beta

  • ESPHome code
  • Home Assistant integration
  • Durability test
  • Beta documentation
  • power consumption test

Parts

35
QtyValueFootprintReferences
9100kResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R7, R8, R9
5TestPointTestPoint:TestPoint_Pad_D1.0mmDIAG, OA1, OA2, OB1, OB2
3100nResistor_SMD:R_0603_1608MetricC1, C3, C4
3SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabelsJP1, JP2, JP3
2220Resistor_SMD:R_1206_3216MetricR11, R12
2Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2, J3
2LOGOLOGOG***, G***
2MountingHole_PadMountingHole:MountingHole_2.2mm_M2_DIN965_PadH1, H2
10603/LEDResistor_SMD:R_0603_1608MetricD1
110uResistor_SMD:R_0805_2012MetricC2
1220Resistor_SMD:R_0603_1608MetricR10
153261-0471connector:MOLEX_53261-0471J4
1Conn_01x04_PinConnector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_VerticalJ1
1TMC2300footprints:QFN20_3x3_TRIIC1
1white/0603LED_SMD:LED_0603_1608MetricD2

More from fabianmuehlberger/OpenValve

1
  • 2 layers26.2 × 38.1 mmOpenValve pcb, the printed circuit board in 3D

    OpenValve pcb

    fabianmuehlberger/OpenValve

    open source smarthome radiator thermostat

    27 parts19GPL-3.0

Similar boards

  • 4 layers159 × 21.7 mmKSS V50, the printed circuit board in 3D

    KSS V50

    anaidan/KSS_V50

    Kinetic Sun Sculpture V50

    128 parts
  • 4 layers16.5 × 16 mmTMC2300 Driver 1 1, the printed circuit board in 3D

    TMC2300 Driver 1 1

    jr-haferkamp/swiffy-robot

    Autonomous desk-cleaning robot. Full-cycle development including mechanical design, custom electronics, and control firmware using Arduino .

    12 partsApache-2.0
  • 4 layers25.9 × 63.9 mmEasyduino ESP32S3, the printed circuit board in 3D

    Easyduino ESP32S3

    Hanqaqa/Easyduino

    Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

    35 parts755CERN-OHL-P-2.0
  • 4 layers36.8 × 78.6 mmGamepad Left, the printed circuit board in 3D

    Gamepad Left

    tschicki/PS2-Portable

    A custom designed PS2 Portable

    35 parts207MIT
  • 4 layers35.6 × 17.8 mmLofive, the printed circuit board in 3D

    Lofive

    mwelling/lofive

    RISC-V microcontroller board based on SiFive FE310.

    35 parts161
  • 4 layers89 × 93 mmFlasher2, the printed circuit board in 3D

    Flasher2

    clydeshaffer/gametank

    design files for the gametank hardware implementation

    35 parts150
  • 4 layers50 × 60 mmPiCCANTE OBD Dongle, the printed circuit board in 3D

    PiCCANTE OBD Dongle

    Alia5/PiCCANTE

    PiCCANTE is a powerful tool for exploring and reversing CAN busses of vehicles, based on Raspberry Pi Pico (any model)

    35 parts104GPL-3.0
  • 4 layers28.9 × 28.9 mmAgnus, the printed circuit board in 3D

    Agnus

    jbilander/ReAgnus

    A drop-in replacement PCB for the Amiga Agnus chip

    35 parts97CC-BY-SA-4.0

Questions

How big is the Tmc 2300 standalone bob PCB?

It measures 28.8 × 25.4 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Tmc 2300 standalone bob use?

35 parts, built around the TMC2300-LA-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tmc 2300 standalone bob KiCad files?

From the fabianmuehlberger/OpenValve repository on GitHub, at the commit this page was made from: the board is CAD/tmc_2300_standalone_bob/tmc_2300_standalone_bob.kicad_pcb and its schematic CAD/openValve_pcb/openValve_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tmc 2300 standalone bob design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).