2 layers62 × 89.8 mm
FabX compact
fabXlabs/fabX_compactPCB
Compact PCB (M5+CardReader+3xIO) for many simple Tasks
77 partsCERN-OHL-S-2.0
2 layers61 × 34.5 mm
SpeedyAdapter
fabXlabs/SpeedyAdapterPCB- Size
- 61 × 34.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 22
- Pads
- 85
- Tracks, vias
- 59, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Feb 2025
- Updated
- 28 Feb 2025
Overview
SpeedyAdapter is an open-source printed circuit board by fabXlabs, from the fabXlabs/SpeedyAdapterPCB repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 61 × 34.5 mm with 20 parts on 22 nets, routed with 59 tracks and 2 vias.
It is built around the PCN-105D3MHZ,000. Its parts include 5 connectors, 4 resistors, 2 diodes, 2 transistors and 2 switches.
Main components
1Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01 | Connector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork | J2, J3, J4, J5 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | D | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | PCN-105D3MHZ | Relay_THT:Relay_SPST_TE_PCN-1xxD3MHZ | K1, K2 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J6 |
| 1 | ~ | speedyAdapter:esp32-c3 supermini | U1 |
The 16 most common of 20 parts.
Similar boards
- 2 layers55.5 × 18 mm
- 2 layers66.9 × 74.5 mm
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0
Questions
How big is the SpeedyAdapter PCB?
It measures 61 × 34.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SpeedyAdapter use?
20 parts, built around the PCN-105D3MHZ,000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SpeedyAdapter KiCad files?
From the fabXlabs/SpeedyAdapterPCB repository on GitHub, at the commit this page was made from: the board is speedyAdapter.kicad_pcb and its schematic speedyAdapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SpeedyAdapter design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).