
Midiori
fabPlane/x68000-midi
X68000 MIDI and 8 MB RAM expansion card: Gowin GW1NR-9, YM3802-compatible gateware in Amaranth, and a universal I/O slot breakout. CC0.

X68000 MIDI and 8 MB RAM expansion card: Gowin GW1NR-9, YM3802-compatible gateware in Amaranth, and a universal I/O slot breakout. CC0.
Midiori is an open-source printed circuit board by fabPlane, from the fabPlane/x68000-midi repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 141 × 150 mm with 92 parts on 248 nets, routed with 1,622 tracks and 222 vias.
It is built around the ICE40HX1K-TQ144, SN74LVC245APW and 74LCX07T, with the TL072, AK4432 and H11L1 among its other parts. Its parts include 39 capacitors, 18 ICs, 17 resistors, 9 connectors and 2 crystals. It belongs with the FPGA and CPLD boards of this library.
midiori tag v3.0 (63e8663, 2024-12-10) — an unreleased hardware revision on a side branch of
https://github.com/tdaede/midiori (CC0). Hardware only; the gateware is v2's.
What it adds over the v2.2 board in ../midiori/:
Kept here for the MIDI IN circuit, the LVC245 bus interface and as a KiCad 6 starting point.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C26 +11 |
| 10 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R4, R5, R7, R8, R10, R11, R14, R17 |
| 7 | SN74LVC245APW | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U4, U5, U6, U7, U8, U9, U18 |
| 6 | 10uF | Capacitor_SMD:C_Elec_5x5.8 | C29, C30, C31, C32, C34, C35 |
| 4 | 220 | Resistor_SMD:R_0805_2012Metric | R6, R9, R15, R16 |
| 4 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C25, C36 |
| 4 | AudioJack3 | Connector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_Horizontal | J3, J5, J6, J8 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R12, R13 |
| 2 | 74LCX07 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U16 |
| 2 | AP2205K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U11, U14 |
| 2 | Mini-DIN-5 | x68k:MD-50SM | J4, J9 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 2 | TestPoint | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 16MHz | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CA-4Pin_7.0x5.0mm | X1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C28 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C27 |
| 1 | 24.576MHz | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CA-4Pin_7.0x5.0mm | X2 |
| 1 | ACKS | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP1 |
| 1 | AK4432 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U12 |
| 1 | AP2127K-1.2 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | AT25SF081-SSHD-X | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | DIF | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP2 |
| 1 | G*** | x68k:midiori_logo | svg2mod |
| 1 | H11L1 | Package_DIP:SMDIP-6_W9.53mm | U17 |
| 1 | ICE40HX1K-TQ144 | Package_QFP:TQFP-144_20x20mm_P0.5mm | U10 |
| 1 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U15 |
| 1 | TL074 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U13 |
| 1 | midiori-rescue_x68000_expansion-x68k-midiori-rescue | x68k:x68000_expansion_vias | J1 |

fabPlane/x68000-midi
X68000 MIDI and 8 MB RAM expansion card: Gowin GW1NR-9, YM3802-compatible gateware in Amaranth, and a universal I/O slot breakout. CC0.

Smoothieware/Smoothieboard2
Hardware files for the Smoothieboard v2, and extension boards


jtflanagan/AppleTini
Teeny 4.1-based multifunctional Apple II peripheral card



Ccecil/6-Axis-Breakout
Breakout board for the V2 Smoothieboard which allows expansion to 6 axis. Also has a header intended to add a secondary breakout for retrofitting parallel port driven machines

clemenskuske/midi_development_board
Simple board to intercept and modify midi signals with ESP32

FPGAwars/icezum
:star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board
It measures 141 × 150 mm and has 2 copper layers, 1.6 mm thick.
92 parts, built around the ICE40HX1K-TQ144, SN74LVC245APW, 74LCX07T and TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fabPlane/x68000-midi repository on GitHub, at the commit this page was made from: the board is reference/midiori-v3.0/midiori.kicad_pcb and its schematic reference/midiori-v3.0/midiori.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).