Skip to the content
2 layers20.3 × 35.6 mmC64-ROM, the printed circuit board in 3D

C64-ROM

f1ac0/C642

Commodore 64 replacement parts and expansions

Size
20.3 × 35.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
29
Pads
78
Tracks, vias
94, 7
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
6 Mar 2023
Updated
21 Jan 2024

Overview

C64-ROM is an open-source printed circuit board by f1ac0, from the f1ac0/C64 repository on GitHub. It is a 2-layer board of 20.3 × 35.6 mm with 11 parts on 29 nets, routed with 94 tracks and 7 vias.

Its parts include 3 diodes, 3 connectors, 1 resistor and 1 IC.

README

README.md

C64

I bought my fisrt C64. It was listed as "Untested", and of course it was faulty (12v fuse in PSU, 6569 VIC-II that I replaced with a 8565, RAM U10 replaced with a 41256 and 7406 U8 with dead output to IEC port).

While repairing it, I learned about the components inside the C64, their signals and common faults. I bookmarked open-source alternatives and useful expansions : below is a list of the projects I found interesting.

In this repository I share the boards I created or modified for my own needs (for example to use the parts I have in stock, to add features, or because I like my own routing). At the time of writing, some are still untested.

Disclaimer and Acknowledgements

This is a hobbyist project, it comes with no warranty and no support. Also remember that the Commodore machines are about 40 years old and may fail because of such hardware expansions.

I publish my work under the CC-BY-NC-SA license, unless stated otherwise. Thanks to everyone who share their knowledge and creations.

Cartridge

Simple cartridges :

Diagnostic :

Advanced cartridges :

CIA

CPU

Drive

Modulator

PLA

RAM

ROM

SID

Tape

VIC2

Parts

11
QtyValueFootprintReferences
3DDiode_SMD:D_0805_2012MetricD1, D2, D3
1/CEJumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabelsJP1
110kResistor_SMD:R_0805_2012MetricR1
110kResistor_SMD:R_Array_Convex_4x0603RN1
127C512Package_DIP:DIP-28_W15.24mmU1
1A12Sassa:TestPoint_THTPad_D1.7mm_Drill1.0mmJ3
1A13-15Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1C64_ROM_socketPackage_DIP:DIP-24_W15.24mmJ1
1Jumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP2

More from f1ac0/C64

12
  • 2 layers60.6 × 63 mmKungFuFlash, the printed circuit board in 3D

    KungFuFlash

    f1ac0/C64

    Commodore 64 replacement parts and expansions

    43 parts2
  • 2 layers64.1 × 34.9 mmC64-Pi1541, the printed circuit board in 3D

    C64-Pi1541

    f1ac0/C64

    Commodore 64 replacement parts and expansions

    39 parts2
  • 2 layers58 × 46.9 mmC64-Cartridge, the printed circuit board in 3D

    C64-Cartridge

    f1ac0/C64

    Commodore 64 replacement parts and expansions

    23 parts2
  • 2 layers58 × 46.9 mmC64-VersaCart, the printed circuit board in 3D

    C64-VersaCart

    f1ac0/C64

    Commodore 64 replacement parts and expansions

    22 parts2
  • 2 layers14.6 × 11.4 mmC64-efuse, the printed circuit board in 3D

    C64-efuse

    f1ac0/C64

    Commodore 64 replacement parts and expansions

    13 parts2
  • 2 layers17.5 × 36.6 mmC64-SwinSID, the printed circuit board in 3D

    C64-SwinSID

    f1ac0/C64

    Commodore 64 replacement parts and expansions

    13 parts2
  • 2 layers19 × 36.8 mmC64-PLA, the printed circuit board in 3D

    C64-PLA

    f1ac0/C64

    Commodore 64 replacement parts and expansions

    10 parts2
  • 2 layers12.7 × 25.4 mmC64-RAM xx4256to4164, the printed circuit board in 3D

    C64-RAM xx4256to4164

    f1ac0/C64

    Commodore 64 replacement parts and expansions

    6 parts2
  • 2 layers17.8 × 30.5 mmC64-ROM PLCC, the printed circuit board in 3D

    C64-ROM PLCC

    f1ac0/C64

    Commodore 64 replacement parts and expansions

    6 parts2
  • 2 layers20.3 × 50.8 mmC64-VIC856569, the printed circuit board in 3D

    C64-VIC856569

    f1ac0/C64

    Commodore 64 replacement parts and expansions

    4 parts2
  • 2 layers12.7 × 20.3 mmC64-RAM-41256to4164, the printed circuit board in 3D

    C64-RAM-41256to4164

    f1ac0/C64

    Commodore 64 replacement parts and expansions

    3 parts2

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the C64-ROM PCB?

It measures 20.3 × 35.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the C64-ROM use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the C64-ROM KiCad files?

From the f1ac0/C64 repository on GitHub, at the commit this page was made from: the board is ROM/C64-ROM/C64-ROM.kicad_pcb and its schematic Cartridge/C64-Cartridge/C64-Cartridge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the C64-ROM design in my own project?

Its repository states no licence, so its author keeps all rights: ask f1ac0 before reusing the design.