

C64-PLA
Commodore 64 replacement parts and expansions
- Size
- 19 × 36.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 44
- Pads
- 95
- Tracks, vias
- 158, 17
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Mar 2023
- Updated
- 21 Jan 2024
Overview
C64-PLA is an open-source printed circuit board by f1ac0, from the f1ac0/C64 repository on GitHub. It is a 2-layer board of 19 × 36.8 mm with 10 parts on 44 nets, routed with 158 tracks and 17 vias.
It is built around the SPX3819M5-L-3-3. Its parts include 5 capacitors, 3 ICs and 2 connectors. It belongs with the FPGA and CPLD boards of this library.
Main components
1README
README.mdC64
I bought my fisrt C64. It was listed as "Untested", and of course it was faulty (12v fuse in PSU, 6569 VIC-II that I replaced with a 8565, RAM U10 replaced with a 41256 and 7406 U8 with dead output to IEC port).
While repairing it, I learned about the components inside the C64, their signals and common faults. I bookmarked open-source alternatives and useful expansions : below is a list of the projects I found interesting.
In this repository I share the boards I created or modified for my own needs (for example to use the parts I have in stock, to add features, or because I like my own routing). At the time of writing, some are still untested.
Disclaimer and Acknowledgements
This is a hobbyist project, it comes with no warranty and no support. Also remember that the Commodore machines are about 40 years old and may fail because of such hardware expansions.
I publish my work under the CC-BY-NC-SA license, unless stated otherwise. Thanks to everyone who share their knowledge and creations.
Cartridge
Simple cartridges :
- https://github.com/bwack/Versa64Cart
- https://github.com/SukkoPera/OpenC64Cart
- https://github.com/SukkoPera/OpenC64Cart16K
- https://github.com/SukkoPera/OpenC64KernalCart
Diagnostic :
- https://github.com/svenpetersen1965/Diag64cart
- https://github.com/svenpetersen1965/C64-Diagnostic-Rev.-586220-Harness
Advanced cartridges :
- https://github.com/KimJorgensen/KungFuFlash
- https://github.com/Sgw32/KungFuFlashGD32
- https://github.com/frntc/RAD
- https://github.com/crystalct/MagicDesk2
- https://github.com/msolajic/c64-uni-cart
CIA
CPU
Drive
- https://cbm-pi1541.firebaseapp.com/
- https://github.com/pi1541/Pi1541
- https://github.com/hackup/Pi1541io
- https://github.com/tebl/C64-Pi1541-Module
- https://github.com/Beaupre-Circuit-Design/c64-Pi1541
Modulator
- https://github.com/c0pperdragon/C64-Video-Enhancement/tree/master/analog_only
- https://github.com/pmandes/C64-RF-Modulator
- https://github.com/tebl/C64-Modulator-Replacement
- https://github.com/mbarszcz-pcb/c64-rf-modulator-replacement
PLA
- https://github.com/1c3d1v3r/neatPLA
- https://github.com/desaster/c64-dodgypla
- https://www.freepascal.org/~daniel/c64pla/
RAM
ROM
- https://github.com/SukkoPera/Open2327RomAdapter
- https://www.hackup.net/2022/05/the-kernal-quattro-a-2364-rom-replacement/
SID
Tape
- https://github.com/sweetlilmre/tapuino
- http://sweetlilmre.blogspot.com/2015/03/building-tapuino-r2.html
- https://github.com/sweetlilmre/TapuinoNext
VIC2
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C5 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | SID 6581 | Sassa:DIP-28_W15.24mm_BigPads1.4 | J2 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | XC6206PxxxMR | Sassa:SOT-23 | U3 |
| 1 | XC9536XL-VQ44 | Package_QFP:LQFP-44_10x10mm_P0.8mm | U1 |
More from f1ac0/C64
12- 2 layers60.6 × 63 mm

- 2 layers64.1 × 34.9 mm

- 2 layers58 × 46.9 mm

- 2 layers58 × 46.9 mm

- 2 layers14.6 × 11.4 mm

- 2 layers17.5 × 36.6 mm

- 2 layers20.3 × 35.6 mm

- 2 layers12.7 × 25.4 mm

- 2 layers17.8 × 30.5 mm

- 2 layers12.7 × 12.7 mm

- 2 layers20.3 × 50.8 mm

- 2 layers12.7 × 20.3 mm

Similar boards
- 2 layers30 × 60 mm

SplitFlapDriverATtiny1616V4
adamgmakes/SplitFlapDisplay
A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.
25 parts190 - 4 layers35.6 × 17.8 mm

- 2 layers25.6 × 23 mm

Breakout
skorokithakis/tiny-ESP8266-breakout
A very small and basic ESP8266 breakout board
12 parts115BSD-2-Clause - 4 layers15.2 × 19 mm

- 2 layers31.4 × 20.6 mm

Window sensor V5
gadjet/Window-Door-sensor-Version-5
Version 5 of the Window/Door sensor project this time with ultra low current consumption
32 parts70GPL-2.0 - 6 layers76 × 46.4 mm

Rp2350 driver
sequoia-hope/rp2350-motor-controller
An RP2350 based brushless motor controller
291 parts39 - 2 layers120 × 66 mm

Io daughterboard
kbob/MinimumViableSynth
A virtual analog synthesizer with lots of knobs and buttons.
136 parts28GPL-3.0 - 2 layers41.3 × 44.5 mm

Questions
How big is the C64-PLA PCB?
It measures 19 × 36.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the C64-PLA use?
10 parts, built around the SPX3819M5-L-3-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the C64-PLA KiCad files?
From the f1ac0/C64 repository on GitHub, at the commit this page was made from: the board is PLA/C64-PLA/C64-PLA.kicad_pcb and its schematic Cartridge/C64-Cartridge/C64-Cartridge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the C64-PLA design in my own project?
Its repository states no licence, so its author keeps all rights: ask f1ac0 before reusing the design.