Skip to the content
2 layers40 × 75 mm40pin PICMCU, the printed circuit board in 3D

Pic16f877a Design files and sample code for Ultra Development Kit

Size
40 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
41
Pads
119
Tracks, vias
339, 6
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
19 Mar 2016
Updated
23 Sep 2017

Overview

40pin PICMCU is an open-source printed circuit board by ExploreEmbedded, from the ExploreEmbedded/Pic16f877a_ExploreUltraPicDevKit repository on GitHub. It is a 2-layer board of 40 × 75 mm with 21 parts on 41 nets, routed with 339 tracks and 6 vias.

Its parts include 6 connectors, 4 capacitors, 3 resistors, 3 diodes and 1 IC.

Parts

21
QtyValueFootprintReferences
4CONN_10SIL-10P1, P2, P3, P4
3LEDSM1206D1, D2, D3
20.1uFSM1206C3, C4
222pFSM1206C1, C2
2RSM1206R2, R3
1logo:EE_LOGO(2)EE_LOGO
110KSM1206R1
116F877ADIP-40__600_ELLU1
120MhzHC-49VX1
1CONN_7SIL-7P5
1ICSPSIL-6P6
1JUMPERSIL-2JP1
1rstSW_PUSH_SMALL_2pin_xlSW1

More from ExploreEmbedded/Pic16f877a_ExploreUltraPicDevKit

3
  • 2 layers207.3 × 150.9 mm40pin PICMCU append, the printed circuit board in 3D

    40pin PICMCU append

    ExploreEmbedded/Pic16f877a_ExploreUltraPicDevKit

    Pic16f877a Design files and sample code for Ultra Development Kit

    180 parts17
  • 2 layers279.5 × 19 mmUsb to serial append, the printed circuit board in 3D

    Usb to serial append

    ExploreEmbedded/Pic16f877a_ExploreUltraPicDevKit

    Pic16f877a Design files and sample code for Ultra Development Kit

    84 parts17
  • 2 layers30 × 20 mmUsb to serial, the printed circuit board in 3D

    Usb to serial

    ExploreEmbedded/Pic16f877a_ExploreUltraPicDevKit

    Pic16f877a Design files and sample code for Ultra Development Kit

    10 parts17

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the 40pin PICMCU PCB?

It measures 40 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 40pin PICMCU use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 40pin PICMCU KiCad files?

From the ExploreEmbedded/Pic16f877a_ExploreUltraPicDevKit repository on GitHub, at the commit this page was made from: the board is Hardware Design Files/Hardware_40pin_PICMCU/40pin_PICMCU.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the 40pin PICMCU design in my own project?

Its repository states no licence, so its author keeps all rights: ask ExploreEmbedded before reusing the design.