
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

ESP32 Plant monitor using ADC moisture sensors
ESP Plants is an open-source printed circuit board by exen904, from the exen904/ESP32-Plant-Sensor repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 60 × 55 mm with 11 parts on 30 nets, routed with 67 tracks and 0 vias.
It belongs with the sensors and measurement boards of this library.
This is a simple PCB to attach 6 capacitive moisuture sensors to a ESP32 for plant monitoring in HomeAssistant. The available MiFlora and Tuya clones with Zigbee were to expensive to purchase for all of my plants, so I chose this way.
The PCB works with both V1.2 and V2.0 sensors and applys 5V as working voltage to make it compatible with either one. Connection to the sensors is made via JST 2.0 connectors.
PCB has been updated to accomodate larger tolerances on the ESP footprint THT holes. My first protoytpe showed no errors, but I could confirm, that the tolerances on the THT holes are extremely tight. I adjusted this in the current version, so if you did not order PCBs, please use the current version. If you ordered PCBs from the first revision, you can take a chance at drilling the holes up but I dont really recommend that, as you can also break traces during that.
Please refer to my KiCad Footprint of the ESP I used for the pinout, as there are so many different ESP Devkits available.

I run these with ESPHome, see my code in the code folder. Calibrate the values under calibrate_linear for each state of sensor dry and sensor 100% (sensor partly emerged underwater).
For the HomeAssistant side of things, I created a configuration.yaml entry, which ties each sensor to a plant entity. Example also linked in the code folder. Please do yourself a favour, and name your sensors in ESPHome better than I did.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x03_Pin | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | Plant 1, Plant 2, Plant 3, Plant 4, Plant 5, Plant 6 |
| 1 | ~ | 1_custom_footprints_Library:ESP32_NodeMCU | NodeMCU_32S1 |
The 7 most common of 11 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 60 × 55 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the exen904/ESP32-Plant-Sensor repository on GitHub, at the commit this page was made from: the board is PCB/ESP Plants.kicad_pcb and its schematic PCB/ESP Plants.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).