

Ui interface
- Size
- 59 × 48.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 29
- Pads
- 177
- Tracks, vias
- 277, 111
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 20 Feb 2025
- Updated
- 6 Mar 2026
Overview
Ui interface is an open-source printed circuit board by evolutek, from the evolutek/cartolutek-hardware repository on GitHub. It is a 2-layer board of 59 × 48.5 mm with 45 parts on 29 nets, routed with 277 tracks and 111 vias.
It is built around the SN74LVC1G32. Its parts include 8 resistors, 7 connectors, 6 transistors, 4 capacitors and 4 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
1Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R5, R6, R7, R8 |
| 6 | Q_NMOS_GSD | Package_TO_SOT_SMD:TSOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | M3 | ComponentsEvo:WA-SMSI_9774110360 | H1, H2, H3, H4 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | SN74LVC1G32 | Package_TO_SOT_SMD:SOT-23-5 | U3, U4 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 510 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | Auto Mode Switch | ConnectorsEvo:690367280476 | J4 |
| 1 | Battery Gauge | ConnectorsEvo:66200221022 | J6 |
| 1 | Buzzer | ConnectorsEvo:66200221022 | J7 |
| 1 | D_Schottky | Diode_SMD:D_SOD-523 | D2 |
| 1 | G*** | kibuzzard-69598A88 | kibuzzard-69598A88 |
| 1 | G*** | kibuzzard-69599736 | kibuzzard-69599736 |
| 1 | G*** | kibuzzard-69599623 | kibuzzard-69599623 |
| 1 | G*** | kibuzzard-695995E5 | kibuzzard-695995E5 |
| 1 | G*** | kibuzzard-69599634 | kibuzzard-69599634 |
| 1 | G*** | kibuzzard-695995F9 | kibuzzard-695995F9 |
| 1 | G*** | kibuzzard-69598DA4 | kibuzzard-69598DA4 |
| 1 | G*** | kibuzzard-6959960F | kibuzzard-6959960F |
| 1 | LOGO | MarkingEvo:logo-evo-min | LB2 |
| 1 | LOGO | MarkingEvo:Logo Aisler Min | LB1 |
| 1 | Motor Power Switch | ConnectorsEvo:690367280676 | J1 |
| 1 | NCP718xSN330 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Power Switch | ConnectorsEvo:690367280476 | J3 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Reset Switch | ConnectorsEvo:690367280676 | J5 |
| 1 | UI Interface | ConnectorsEvo:690367281476 | J2 |
| 1 | Waveshare_1.5_inch_OLED | ComponentsEvo:Waveshare 1.5 inch with 8mm spacers | U2 |
More from evolutek/cartolutek-hardware
4- 2 layers115 × 70 mm

- 2 layers60 × 60 mm

- 2 layers56 × 65 mm

- 2 layers36 × 48 mm

Similar boards
- 4 layers61.2 × 61.2 mm

Ganglion 01
OpenBCI/Ganglion_Hardware_Design_Files
General repo for Ganglion hardware files
141 parts91 - 2 layers30 × 37 mm

Metronome
Bindless-Chicken/Metronome
:musical_keyboard: Tiny logic only metronome for when you are on the move
34 parts2MIT - 2 layers73.8 × 63.9 mm

- 2 layers

- 2 layers73.7 × 61 mm

- 2 layers50 × 30 mm

- 2 layers56 × 65 mm

- 2 layers61 × 87.1 mm

Questions
How big is the Ui interface PCB?
It measures 59 × 48.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ui interface use?
45 parts, built around the SN74LVC1G32. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ui interface KiCad files?
From the evolutek/cartolutek-hardware repository on GitHub, at the commit this page was made from: the board is UI Interface/ui-interface.kicad_pcb and its schematic Carte Moteur/carte-moteur.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ui interface design in my own project?
Its repository states no licence, so its author keeps all rights: ask evolutek before reusing the design.