2 layers70 × 20.1 mm
SPD DC MotorHBridge
Jarins/Solder-Paste-Dispenser-with-DCMotor
Motorized solder paste dispenser
48 parts29GPL-3.0
2 layers65 × 60 mm
GYTCARS
evolutek/acdc- Size
- 65 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 37
- Pads
- 284
- Tracks, vias
- 232, 160
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Jun 2022
- Updated
- 15 Dec 2023
Overview
GYTCARS is an open-source printed circuit board by evolutek, from the evolutek/acdc repository on GitHub. It is a 2-layer board of 65 × 60 mm with 53 parts on 37 nets, routed with 232 tracks and 160 vias.
It is built around the TB67H451FNG,EL. Its parts include 17 resistors, 8 capacitors, 5 ICs, 5 diodes and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_SMD:R_0603_1608Metric | R5, R8, R9, R13, R14, R16, R17 |
| 5 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C7, C8 |
| 4 | 1K | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R15 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 3 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C1, C2, C3 |
| 3 | JST PH 2 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | DIRECT, ON/OFF, PROP |
| 3 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 0.15 | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 150 | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | 510 | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | GREEN | LED_SMD:LED_0805_2012Metric | D4, D5 |
| 2 | LOGO | ComponentsEvo:logo-evo | G***, G*** |
| 2 | RED | LED_SMD:LED_0805_2012Metric | D2, D3 |
| 2 | SolderJumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2 |
| 2 | TB67H451FNG | ComponentsEvo:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U2, U3 |
| 1 | Arduino_Nano_v3.x | ComponentsEvo:ArduinoNano | U4 |
| 1 | D | Diode_SMD:D_SOD-523 | D1 |
| 1 | Fuse | ComponentsEvo:0031.7701.11 | F1 |
| 1 | JST PA 3 | ConnectorsEvo:S03B-PASK | LEDS_RING |
| 1 | JST PA 4 | ConnectorsEvo:S04B-PASK | SONAR |
| 1 | MP1584EB | ComponentsEvo:MP1584EN | U1 |
| 1 | RaspberryPI | ComponentsEvo:Shield_Raspberry_Pi_Zero_W | U5 |
| 1 | XT30 Male | ConnectorsEvo:XT30 | BAT |
Questions
How big is the GYTCARS PCB?
It measures 65 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GYTCARS use?
53 parts, built around the TB67H451FNG,EL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GYTCARS KiCad files?
From the evolutek/acdc repository on GitHub, at the commit this page was made from: the board is V1/Board/GYTCARS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GYTCARS design in my own project?
Its repository states no licence, so its author keeps all rights: ask evolutek before reusing the design.
Similar boards
- 2 layers83 × 71 mm
- 2 layers100 × 34 mm
- 2 layers100 × 100 mm
- 2 layers46.8 × 32.2 mm
- 2 layers30 × 23 mm
- 2 layers217.1 × 393.8 mm
Sweepv2
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
53 parts2.1k - 2 layers121.9 × 81.3 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
53 parts1kGPL-3.0