

Coaster
A Stargate thing...
- Size
- 120 × 120 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 279
- Nets
- 175
- Pads
- 950
- Tracks, vias
- 427, 297
- Pours
- 35
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Aug 2024
- Updated
- 19 Dec 2025
Overview
Coaster is an open-source printed circuit board by evansj, from the evansj/ESP32-LED repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 120 × 120 mm with 279 parts on 175 nets, routed with 427 tracks and 297 vias.
It is built around the ESP32-S3-MINI-1-N4R2, MD8942 and ICS-43434, with the XL-1010RGBC-2812B, GRM188R6YA106MA73 and 2060-452/998-404 among its other parts. Its parts include 135 capacitors, 124 diodes, 6 resistors, 5 connectors and 3 ICs. It belongs with the ESP32 boards of this library.
Main components
9ESP32-S3-MINI-1-N4R2
SMD-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi ModulesMD8942
SOT-23-6L-40℃~+85℃ 1 1.1MHz 130uA 4V~36V 600mA 800mV~5V Buck Buck Built-in Fixed Yes SOT-23-6L DC-DC Converters ROHSShanghai Mingda MicroelectronicsDC-DC ConvertersICS-43434
LGA-6(3.5x2.7)-26dB -40℃~+85℃ 0.98mm 1.65V~3.63V 2.65mm 3.5mm 550uA 64dB I2S Omnidirectional Omnidirectional pickup LGA-6(3.5x2.7) MEMS Microphones ROHSTDK InvenSenseMEMS MicrophonesXL-1010RGBC-2812B
SMD,1x1mm-20℃~+85℃ 0.35mA 0.8mm 120° 1kHz 1mm 1mm 2000V 200mcd、800mcd、300mcd 4.5V~5.5V 800Kbit/s B:465nm~475nm、R:620nm~625nm、G:520nm~530nm G:525nm、R:625nm、B:470nm Top-mount Water Clear SMD,1x1mm RGB LEDs(Built-in IC) ROHSXINGLIGHTRGB LEDs(Built-In IC)GRM188R6YA106MA73
060310uF 35V X5R ±20% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMT2060-452/998-404
SMD,P=4mm-60℃~+105℃ 1 18~24 1x2P 2 2P 320V 4mm 9A White SMD,P=4mm Spring Clamp System Terminal Block ROHSWAGOSpring Clamp System Terminal BlockCL10A106MQ8NNN
060310uF 6.3V X5R ±20% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCA45-B6R3K227T
CASE-B-3528-19(mm)-55℃~+125℃ 1.2Ω@100kHz 220uF 6.3V ±10% CASE-B-3528-19(mm) Tantalum Capacitors ROHSHunan Xiangyee in S&TTantalum CapacitorsKH-TYPE-C-16P
SMD-40℃~+85℃ 1 10,000 cycles 16P 30V 3A 7.81mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSkinghelmUSB Connectors
README
PCB/5x7/README.md5x7
These files are for use in KiCad.
Trademark
This is an open source project, but bear in mind you cannot sell boards bearing the Andrews & Arnold Ltd name, the A&A logo, the registered trademark AJK logo, or the GS1 allocated EANs assigned to Andrews & Arnold Ltd.
Images



Auto generated 2025-08-12T11:30:27
Parts
279| Qty | Value | Footprint | References |
|---|---|---|---|
| 126 | 100nF | RevK:C_0402 | C1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +110 |
| 124 | XL-1010RGBC-WS2812B | RevK:SMD1010 | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +108 |
| 4 | ~ | RevK:VCUT120N | V1, V2, V3, V4 |
| 3 | 10uF 35V | RevK:C_0603 | C133, C135, C136 |
| 2 | 5K1 | RevK:R_0402 | R5, R6 |
| 2 | DC | RevK:WAGO-2060-452-998-404 | J4, J5 |
| 1 | 100nF | RevK:C_0603_ | C139 |
| 1 | 10K | RevK:R_0402 | R1 |
| 1 | 10uF 35V | RevK:C_0603_ | C137 |
| 1 | 10uF 6.3V | RevK:C_0603_ | C138 |
| 1 | 10uH | RevK:L_4x4_ | L1 |
| 1 | 120x120 | RevK:PCB120120 | PCB1 |
| 1 | 124k | RevK:R_0402_ | R2 |
| 1 | 1M | RevK:R_0402_ | R4 |
| 1 | 1uF | RevK:C_0402 | C134 |
| 1 | 220uF Tant | RevK:CP_EIA-3528-21_Kemet-B | C131 |
| 1 | 22uF | RevK:C_0603 | C130 |
| 1 | 39k2 | RevK:R_0402_ | R3 |
| 1 | ESP32-S3-MINI-1 | RevK:ESP32-S3-MINI-1 | U2 |
| 1 | ICS43434_MEMS_Mic | RevK:ICS43434_MEMS_Mic | U1 |
| 1 | MD8942 | RevK:SOT-23-6-MD8942 | U3 |
| 1 | Reset | RevK:AA-Pad | J1 |
| 1 | TC2030-USB-NL-DS | RevK:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J2 |
| 1 | USB-C-Socket-H | RevK:USB-C-Socket-H | J3 |
More from evansj/ESP32-LED
12- 2 layers137 × 148.9 mm

- 2 layers76.2 × 22.9 mm

- 2 layers

- 2 layers

- 2 layers120 × 120 mm

- 2 layers120 × 120 mm

- 2 layers

- 2 layers

- 11 layers198 × 98 mm

- 2 layers10 × 18 mm

- 2 layers70 × 70 mm

- 2 layers70 × 70 mm

Similar boards
- 2 layers70 × 70 mm

- 2 layers70 × 70 mm

Bell
sijinhui/SolarSystem
Fork of codeberg.org/RevK/SolarSystem — adds ESP32-S3 N16R8 (octal PSRAM) build variant (branch n16r8-octal-psram)
51 partsGPL-3.0 - 2 layers70 × 70 mm

Recorder
Yang-xy-svg/ESP_OpenMic
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
71 partsGPL-3.0 - 2 layers90 × 90 mm

PocketPSU elec main
jarrod89/pocketPSU
Input1: - Output1 can be used to supply pocketPSU via a battery - Optional battery charging capability (addon board with BMS)
97 parts2 - 4 layers163.3 × 100 mm

HF phase detector
KLFAMO/phase_detector_Artiq
This is a phase detector designed to measure phase differences for input frequencies ranging from 0 to approximately 200 MHz. The device includes configurable frequency dividers for each input channel.
461 parts - 2 layers70 × 70 mm

- 4 layers94.5 × 39.7 mm

STM32L4Q5CGT AudioSpectrumAnalyzer
OscarBazylewich/STM32_Audio_Spectrum_Analyzer_CustomPCB
This repository contains a 4-layer KiCad board for the STM32 Audio Spectrum Analyzer. The board has an STM32L4Q5CGT6 MCU and an I2S MEMS microphone (ICS-43434).
39 partsGPL-3.0 - 4 layers60 × 60 mm

Questions
How big is the Coaster PCB?
It measures 120 × 120 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Coaster use?
279 parts, built around the ESP32-S3-MINI-1-N4R2, MD8942, ICS-43434 and XL-1010RGBC-2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Coaster KiCad files?
From the evansj/ESP32-LED repository on GitHub, at the commit this page was made from: the board is PCB/Coaster2/Coaster.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Coaster design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).