

A Stargate thing...
- Size
- 76.2 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 510
- Nets
- 273
- Pads
- 1,552
- Tracks, vias
- 1,583, 155
- Pours
- 1,512
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Aug 2024
- Updated
- 19 Dec 2025
Overview
30x9 is an open-source printed circuit board by evansj, from the evansj/ESP32-LED repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 76.2 × 22.9 mm with 510 parts on 273 nets, routed with 1,583 tracks and 155 vias.
It is built around the XL-1615RGBC-2812B and GRM033R61A104KE15. Its parts include 270 diodes and 232 capacitors.
Main components
2XL-1615RGBC-2812B
SMD-4P,1.6x1.5mm-20℃~+85℃ 0.35mA 0.6mm 1.5mm 1.6mm 120° 130mcd、360mcd、110mcd 3.5V~5.5V 3000V 4.5kHz 800Kbit/s G:525nm、R:625nm、B:470nm R:620nm~625nm、B:465nm~470nm、G:525nm~530nm Top-mount Water Clear SMD-4P,1.6x1.5mm RGB LEDs(Built-in IC) ROHSXINGLIGHTRGB LEDs(Built-In IC)GRM033R61A104KE15
0201100nF 10V X5R ±10% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
PCB/5x7/README.md5x7
These files are for use in KiCad.
Trademark
This is an open source project, but bear in mind you cannot sell boards bearing the Andrews & Arnold Ltd name, the A&A logo, the registered trademark AJK logo, or the GS1 allocated EANs assigned to Andrews & Arnold Ltd.
Images



Auto generated 2025-08-12T11:30:27
Parts
510| Qty | Value | Footprint | References |
|---|---|---|---|
| 270 | XL-1010RGBC-WS2812B | RevK:SMD1615 | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +254 |
| 232 | 100nF | RevK:C_0201 | C1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C109, C110, C111, C112, C113 +216 |
| 8 | TestPoint | RevK:PAD-2mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP9 |
More from evansj/ESP32-LED
12- 2 layers137 × 148.9 mm

- 2 layers

- 2 layers

- 2 layers120 × 120 mm

- 2 layers120 × 120 mm

- 2 layers120 × 120 mm

- 2 layers

- 2 layers

- 11 layers198 × 98 mm

- 2 layers10 × 18 mm

- 2 layers70 × 70 mm

- 2 layers70 × 70 mm

Similar boards
- 2 layers70 × 70 mm

Faikout
dovy6/Faiked
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
47 partsGPL-3.0 - 2 layers99.5 × 63.5 mm

- 2 layers39 × 65 mm

Faikout
Rsa76d/FaikoutRSA
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
91 partsGPL-3.0 - 2 layers70 × 70 mm

Recorder
Yang-xy-svg/ESP_OpenMic
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…
71 partsGPL-3.0 - 2 layers70 × 70 mm

Access
sijinhui/SolarSystem
Fork of codeberg.org/RevK/SolarSystem — adds ESP32-S3 N16R8 (octal PSRAM) build variant (branch n16r8-octal-psram)
83 partsGPL-3.0 - 2 layers110 × 100 mm

Panel
lyso1/Lysol-XYZ-DBoard
An edited version of the daughter board that was used on XYZ's B-KEN-KO
512 parts7MIT - 2 layers110 × 100 mm

- 2 layers102 × 102 mm

Bno08x i2c board v5-large panel
tgodfrey0/BNO08x-I2C-PCBs
This repository contains W.I.P. code and hardware designed for a 9DOF sensor module using a BNO085.
512 parts1
Questions
How big is the 30x9 PCB?
It measures 76.2 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 30x9 use?
510 parts, built around the XL-1615RGBC-2812B and GRM033R61A104KE15. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 30x9 KiCad files?
From the evansj/ESP32-LED repository on GitHub, at the commit this page was made from: the board is PCB/30x9/30x9.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 30x9 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).