Skip to the content
2 layers66.7 × 82.1 mmKuropad, the printed circuit board in 3D

KuroPad is a 8 key macropad with an EC11 rotary encoder and a 0.91" OLED display. It also has a SK6812 MINI-E LED under each keyswitch to allow for per-switch RGB lighting.

Size
66.7 × 82.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
31
Pads
129
Tracks, vias
249, 46
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
9 Jun 2025
Updated
9 Jun 2025

Overview

Kuropad is an open-source printed circuit board by euvalennn, from the euvalennn/kuropad repository on GitHub. It is a 2-layer board of 66.7 × 82.1 mm with 29 parts on 31 nets, routed with 249 tracks and 46 vias.

Its parts include 17 diodes, 9 switches, 1 IC and 1 connector. It belongs with the lEDs and displays boards and the RP2040 boards of this library.

README

README.md

KuroPad

KuroPad is a 8 key macropad with an EC11 rotary encoder and a 0.91" OLED display. It also has a SK6812 MINI-E LED under each keyswitch to allow for per-switch RGB lighting.

<img src=assets/finished.png width="600">

Features:

  • 8 keyswitches
  • 128x32 0.91in OLED display
  • EC11 rotary encoder to control volume, press to mute (customizable)
  • SK6812 MINI-E LEDs under each switch
  • Basic QMK support (VIA support pending!)

Challenges:

It was my first time using Fusion so even though my case design is pretty simple, it took me a fair amount of time (more than I'd like to admit lol). Also my first time using KiCad (or any PCB software for that matter) so I had to redo the routing like 10 times.

BOM:

  • 1x Seeed XIAO RP2040
  • 8x through-hole 1N4148 diodes
  • 8x MX-Style switches
  • 1x EC11 rotary encoder
  • 1x SSD1306 OLED display
  • 8x DSA keycaps
  • 8x SK6812 MINI-E LEDs
  • 4x M3x5mmx4mm heat set inserts
  • 4x M3x16mm screws

Pictures

Here are pictures of the schematic, PCB and the case.

SchematicPCBCAD
<img src=assets/schematic.png width="400"><img src=assets/pcb.png width="300"><img src=assets/case.png width="500">

Parts

29
QtyValueFootprintReferences
91N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD3, D4, D5, D6, D7, D8, D9, D10, D11
8LED_SK6812MINISK6812:LED_SK6812MINID1, D2, D12, D13, D14, D15, D16, D17
8SW_Push_45degButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
1LOGOHack club flag:hack-club-flagG***
1OLEDOLED Display:SSD1306-0.91-OLED-4pin-128x32J1
1RotaryEncoder_SwitchRotary encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW9
1XIAO-RP2040-DIPOPL:XIAO-RP2040-DIPU1

Similar boards

  • 2 layers52.3 × 10.5 mmStackLink, the printed circuit board in 3D

    StackLink

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    29 parts5.1kGPL-3.0
  • 2 layers56 × 20 mmHallEffectXY Endstop, the printed circuit board in 3D

    HallEffectXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    29 parts1.1kGPL-3.0
  • 2 layers50 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    29 parts1kGPL-3.0
  • 2 layers16.8 × 13.6 mmE Fidget Lite, the printed circuit board in 3D

    E Fidget Lite

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    29 parts915
  • 2 layers85 × 12.5 mmTERES PCB3-TOUCH BTN Rev.A, the printed circuit board in 3D

    TERES PCB3-TOUCH BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    29 parts578Apache-2.0
  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers80 × 55 mmGB CARTPP XC, the printed circuit board in 3D

    GB CARTPP XC

    Gekkio/gb-hardware

    Game Boy -related custom hardware by gekkio

    29 parts379CC-BY-4.0
  • 2 layers55 × 58 mmProto ads bee mcu board, the printed circuit board in 3D

    Proto ads bee mcu board

    PantsForBirds/adsbee

    Open Source Embedded ADS-B Receiver

    29 parts344GPL-3.0

Questions

How big is the Kuropad PCB?

It measures 66.7 × 82.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Kuropad use?

29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kuropad KiCad files?

From the euvalennn/kuropad repository on GitHub, at the commit this page was made from: the board is pcb/KuroPad.kicad_pcb and its schematic pcb/KuroPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kuropad design in my own project?

Its repository states no licence, so its author keeps all rights: ask euvalennn before reusing the design.