Skip to the content
2 layers70 × 30 mmKlima, the printed circuit board in 3D

An ESP8266 based humidity and temperature sensor

Size
70 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
10
Pads
46
Tracks, vias
75, 12
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
1 Jul 2021
Updated
2 Jul 2021

Overview

Klima is an open-source printed circuit board by eurovibes, from the eurovibes/klima repository on GitHub. It is a 2-layer board of 70 × 30 mm with 17 parts on 10 nets, routed with 75 tracks and 12 vias.

It is built around the DHT11. Its parts include 5 connectors, 2 capacitors, 2 ICs, 1 resistor and 1 diode. It belongs with the sensors and measurement boards and the ESP8266 boards of this library.

Main components

1

README

README.md

KiCad CI/CD for Klima sensor klima logo

klima - A ESP8266 based humidity and temperature sensor

Klima was developed after scraping past a massive overheating of servers caused by an unnoticed air condition failure. To be able to install the sensor without further actions an ESP8266 wireless module was choosen.

License rules

klima is provided under the terms of the CERN-OHL-S license version 2 as provided in the LICENSES/CERN-OHL-S-2.0 file.

Instead of adding license boilerplates to the individual files, klima uses SPDX license identifiers, which are machine parseable and considered legaly equivalent.

The SPDX license identifier in klima shall be added at the first possible line in a file which can contain a comment. This is normally the first line except for scripts. Scripts require the #!PATH_TO_INTERPRETER tag in the first line; place the SPDX identifier into the second line.

The SPDX license identifier is added in form of a comment.

Copyright and License

Copyright Benedikt Spranger 2021. This source describes Open Hardware and is licensed under the CERNOHL-S v2. You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2 (https://ohwr.org/cern ohl s v2.txt ). This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 for applicable conditions. Source location: https://github.com/eurovibes/klima As per CERN-OHL-S v2 section 4, should You produce hardware based on this source, You must where practicable maintain the Source Location visible on the external case of the klima or other products you make using this source.

Parts

17
QtyValueFootprintReferences
4~MountingHole:MountingHole_3.2mm_M3_DIN965_PadH101, H102, H103, H104
2CCapacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mmC101, C102
2PWRTerminalBlock_WAGO:TerminalBlock_WAGO_236-102_1x02_P5.00mm_45DegreeJ103, J105
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR101
11N4004Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD101
1BOOTButton_Switch_THT:SW_PUSH_6mmSW101
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU102
1ESP8266-01SConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ101
1LOGOeurovibes:LOGOG***
1PROGConnector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalJ102
1WPMDH1100xx1SWPMDH1100xx1S:WPMDH1100xx1SU101
1serialConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ104

Similar boards

  • 2 layers96.6 × 82.8 mmStarbie, the printed circuit board in 3D

    Starbie

    SharKingStudios/Starbie

    Half-Life Week 1 Example Project

    11 parts28MIT
  • 2 layers100 × 50 mmConveyor belt pcb, the printed circuit board in 3D

    Conveyor belt pcb

    lansidev/conveyor-belt

    Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi

    22 parts9MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers62 × 19.3 mmSniffingTrinket, the printed circuit board in 3D

    SniffingTrinket

    GeorgK/SniffingTrinket

    A room climate monitor using the Adafruit Trinket Pro

    23 parts6GPL-3.0
  • 2 layersArduino relay, the printed circuit board in 3D

    Arduino relay

    bhaskar9980/Guardian

    Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

    58 parts5MIT
  • 2 layers100 × 43.5 mmFirefly, the printed circuit board in 3D

    Firefly

    Twistx77/Firefly

    Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

    33 parts5GPL-3.0
  • 2 layers30.5 × 77.5 mmProyecto sensor temperatura, the printed circuit board in 3D

    Proyecto sensor temperatura

    unla-investigacion-desarrollo/ecosistema-iot

    Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:

    8 parts5

Questions

How big is the Klima PCB?

It measures 70 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Klima use?

17 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Klima KiCad files?

From the eurovibes/klima repository on GitHub, at the commit this page was made from: the board is klima.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Klima design in my own project?

Its repository states no licence, so its author keeps all rights: ask eurovibes before reusing the design.