Skip to the content
2 layers54.6 × 86.4 mmBbbalarm, the printed circuit board in 3D

An Alarm cape for Beaglebone Black

Size
54.6 × 86.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
99
Pads
198
Tracks, vias
172, 16
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
4 Jul 2021
Updated
2 Jul 2022

Overview

Bbbalarm is an open-source printed circuit board by eurovibes, from the eurovibes/bbbalarm repository on GitHub. It is a 2-layer board of 54.6 × 86.4 mm with 37 parts on 99 nets, routed with 172 tracks and 16 vias.

It is built around the AT24C512C-SSHD-T, HCPL-263N and SHT35-DIS-F. Its parts include 13 resistors, 8 connectors, 5 diodes, 4 ICs and 2 switches.

Main components

3

README

README.md

KiCad CI/CD for bbbalarm Beaglebon Black Cape bbbalarm logo

bbbalarm - An Alarm cape for Beaglebone Black

The Beaglobone Black is a TI Sitara AM3359 ARM Cortex-A8 CPU based evaluation board with two 40pin 100mil pinsockets. These pinsockets can be used for additional functionality boards called capes. The bbbalarm cape enhance the Beaglebone Black by adding coupled and decoupled inputs, that can be used to supervise an air condition or read out a presence detector.

License rules

bbbalarm is provided under the terms of the CERN-OHL-S license version 2 as provided in the LICENSES/CERN-OHL-S-2.0 file.

Instead of adding license boilerplates to the individual files, bbbalarm uses SPDX license identifiers, which are machine parseable and considered legaly equivalent.

The SPDX license identifier in bbbalarm shall be added at the first possible line in a file which can contain a comment. This is normally the first line except for scripts. Scripts require the #!PATH_TO_INTERPRETER tag in the first line; place the SPDX identifier into the second line.

The SPDX license identifier is added in form of a comment.

Copyright and License

Copyright Benedikt Spranger 2021. This source describes Open Hardware and is licensed under the CERNOHL-S v2. You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2 (https://ohwr.org/cern ohl s v2.txt ). This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 for applicable conditions. Source location: https://github.com/eurovibes/bbbalarm As per CERN-OHL-S v2 section 4, should You produce hardware based on this source, You must where practicable maintain the Source Location visible on the external case of the bbbalarm or other products you make using this source.

Parts

37
QtyValueFootprintReferences
61kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR105, R106, R107, R108, R109, R110
51kResistor_SMD:R_0402_1005MetricR101, R102, R103, R104, R113
4LEDLED_THT:LED_D3.0mmD101, D102, D103, D104
2330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR111, R112
2BeagleBone_Black_HeaderSocket_BeagleBone_Black:Socket_BeagleBone_BlackP8, P9
1100nCapacitor_SMD:C_0402_1005MetricC101
11N4004Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD114
1A0Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP107
1A1Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP106
1A2Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP105
1AT24C512C-SSHD-TPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU103
1HCPL-263NPackage_DIP:DIP-8_W7.62mmU101
1IN0TerminalBlock_WAGO:TerminalBlock_WAGO_236-102_1x02_P5.00mm_45DegreeJ101
1IN1TerminalBlock_WAGO:TerminalBlock_WAGO_236-102_1x02_P5.00mm_45DegreeJ103
1PIR0TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_HorizontalJ104
1PIR1TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_HorizontalJ105
1PWRTerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_HorizontalJ102
1PWRButton_Switch_THT:SW_PUSH_6mmSW102
1ResetButton_Switch_THT:SW_PUSH_6mmSW101
1SHT35-DISSensor_Humidity:Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mmU102
1WPJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP108
1WPMDH1100xx1SWPMDH1100xx1S:WPMDH1100xx1SU104
1serialConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ106

Similar boards

  • 4 layers42 × 83.9 mmStratoSoar MK2.2, the printed circuit board in 3D

    StratoSoar MK2.2

    crnicholson/StratoSoar-MK2

    StratoSoar is an engineering project that aims to be able to fly a glider (dropped from a high-altitude balloon), down to any selected coordinates.

    116 parts24
  • 2 layers15 × 11.2 mmSgp40breakout, the printed circuit board in 3D

    Sgp40breakout

    agners/sgp40breakout

    Sensirion SGP40 Breakout Board

    14 parts2BSD-2-Clause
  • 2 layers70 × 52 mmRustypill, the printed circuit board in 3D

    Rustypill

    Determinant/rustypill-pcb

    A uniform design for my daily/IoT need.

    60 parts1
  • 4 layers79.9 × 84.7 mmUTS PCB Dewi, the printed circuit board in 3D

    UTS PCB Dewi

    astarsD130/UTS-matkul-pcb

    55 parts
  • 2 layers16.5 × 20 mmSHT35 Breakout, the printed circuit board in 3D

    SHT35 Breakout

    aycaozkann/sensirion-sht35-breakout

    SHT35 I2C temperature/humidity sensor breakout board — KiCad schematic + PCB, DRC/ERC clean, fab-ready gerbers/BOM/PnP

    10 parts
  • 4 layers54.6 × 86.4 mmCom4bbb, the printed circuit board in 3D

    Com4bbb

    eurovibes/com4bbb

    RS485 / WiFi cape for Beaglebone black

    72 partsCERN-OHL-S-2.0
  • 4 layers47.8 × 23.1 mmSoar sense, the printed circuit board in 3D

    Soar sense

    MaxBaex/hw_sense

    PCB design for tiny temperature and humidty sensor

    58 parts
  • 2 layers120 × 120 mmUSB FTDI FT4232H Chip, the printed circuit board in 3D

    USB FTDI FT4232H Chip

    mmantawy-sees-ai/FTDI-FT4232H-PCB

    New PCB that has the FTDI FT4232H Chip

    74 parts

Questions

How big is the Bbbalarm PCB?

It measures 54.6 × 86.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Bbbalarm use?

37 parts, built around the AT24C512C-SSHD-T, HCPL-263N and SHT35-DIS-F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bbbalarm KiCad files?

From the eurovibes/bbbalarm repository on GitHub, at the commit this page was made from: the board is bbbalarm.kicad_pcb and its schematic bbbalarm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bbbalarm design in my own project?

Its repository states no licence, so its author keeps all rights: ask eurovibes before reusing the design.