

Klima
An ESP8266 based humidity and temperature sensor
- Size
- 70 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 10
- Pads
- 46
- Tracks, vias
- 75, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jul 2021
- Updated
- 2 Jul 2021
Overview
Klima is an open-source printed circuit board by eurovibes, from the eurovibes/klima repository on GitHub. It is a 2-layer board of 70 × 30 mm with 17 parts on 10 nets, routed with 75 tracks and 12 vias.
It is built around the DHT11. Its parts include 5 connectors, 2 capacitors, 2 ICs, 1 resistor and 1 diode. It belongs with the sensors and measurement boards and the ESP8266 boards of this library.
Main components
1README
README.mdklima - A ESP8266 based humidity and temperature sensor
Klima was developed after scraping past a massive overheating of servers caused by an unnoticed air condition failure. To be able to install the sensor without further actions an ESP8266 wireless module was choosen.
License rules
klima is provided under the terms of the CERN-OHL-S license version 2 as provided in the LICENSES/CERN-OHL-S-2.0 file.
Instead of adding license boilerplates to the individual files, klima uses SPDX license identifiers, which are machine parseable and considered legaly equivalent.
The SPDX license identifier in klima shall be added at the first possible line in a file which can contain a comment. This is normally the first line except for scripts. Scripts require the #!PATH_TO_INTERPRETER tag in the first line; place the SPDX identifier into the second line.
The SPDX license identifier is added in form of a comment.
Copyright and License
Copyright Benedikt Spranger 2021. This source describes Open Hardware and is licensed under the CERNOHL-S v2. You may redistribute and modify this source and make products using it under the terms of the CERN-OHL-S v2 (https://ohwr.org/cern ohl s v2.txt ). This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 for applicable conditions. Source location: https://github.com/eurovibes/klima As per CERN-OHL-S v2 section 4, should You produce hardware based on this source, You must where practicable maintain the Source Location visible on the external case of the klima or other products you make using this source.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | ~ | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H101, H102, H103, H104 |
| 2 | C | Capacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mm | C101, C102 |
| 2 | PWR | TerminalBlock_WAGO:TerminalBlock_WAGO_236-102_1x02_P5.00mm_45Degree | J103, J105 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R101 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D101 |
| 1 | BOOT | Button_Switch_THT:SW_PUSH_6mm | SW101 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U102 |
| 1 | ESP8266-01S | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J101 |
| 1 | LOGO | eurovibes:LOGO | G*** |
| 1 | PROG | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J102 |
| 1 | WPMDH1100xx1S | WPMDH1100xx1S:WPMDH1100xx1S | U101 |
| 1 | serial | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J104 |
Similar boards
- 2 layers96.6 × 82.8 mm

- 2 layers100 × 50 mm

Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm

- 2 layers

OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm

SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers

Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm

Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm

Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5
Questions
How big is the Klima PCB?
It measures 70 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Klima use?
17 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Klima KiCad files?
From the eurovibes/klima repository on GitHub, at the commit this page was made from: the board is klima.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Klima design in my own project?
Its repository states no licence, so its author keeps all rights: ask eurovibes before reusing the design.
