

Motherboard
- Size
- 222.3 × 127 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 208
- Nets
- 200
- Pads
- 1,120
- Tracks, vias
- 852, 10
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Aug 2024
- Updated
- 8 Nov 2025
Overview
Motherboard is an open-source printed circuit board by ethanjamesauto, from the ethanjamesauto/modular_8bit_computer repository on GitHub. It is a 2-layer board of 222.3 × 127 mm with 208 parts on 200 nets, routed with 852 tracks and 10 vias.
Its parts include 144 resistors, 48 connectors and 16 diodes. It belongs with the computers and single-board computers boards of this library.
README
README.mdModular 8-bit Computer
This is the repository for an 8-bit computer system that is built using cards with a standardized interface.
- CPU card
- Protoboard card
- This card contains an onboard clock generator, address and data registers/buffers, and a protoboard area for testing designs.
- Bus interface modeling
Here's an example of a card:

Current Bus Specification
// The main bus wires (32+8=40 wires total)
// On the bus connector, all buses have LSBs closer to the power pins and MSBs farther away
wire VCC_5V;
wire GND;
wire clk; // generated by motherboard clock generator
wire rst_n; // probably a button on the motherboard
wire VCC_3V3;
wire we_n; // active LOW
wire oe_n; // active LOW
wire int_n; // pulled up by motherboard; driven down by any peripheral (could be used for interrupts)
wire [7:0] data;
wire [15:0] addr; // 64k address space is suppored by default. More address bits may be added later
wire [7:0] aux_bus;Parts
208| Qty | Value | Footprint | References |
|---|---|---|---|
| 144 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | r1, r10, r11, r100, r101, r102, r103, r104, r105, r106, r107, r108, r109, r110, r111, r112 +128 |
| 16 | A0 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 16 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J33, J34, J35, J36, J37, J38, J39, J40, J41, J42, J43, J44, J45, J46, J47, J48 |
| 16 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3, J4, J6, J8, J10, J12, J14, J16, J18, J20, J22, J24, J26, J28, J30, J32 |
| 16 | Conn_01x40_Pin | Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_Vertical | J1, J2, J5, J7, J9, J11, J13, J15, J17, J19, J21, J23, J25, J27, J29, J31 |
More from ethanjamesauto/modular_8bit_computer
12- 2 layers229.9 × 93.3 mm

- 2 layers229.9 × 83.8 mm

- 2 layers229.9 × 93.3 mm

- 2 layers229.9 × 83.8 mm

- 2 layers86.4 × 53.8 mm

- 2 layers229.9 × 86.4 mm

- 2 layers2.8 × 6.6 mm

- 2 layers111.8 × 77.2 mm

- 2 layers48.3 × 48.3 mm

- 2 layers119.4 × 45.7 mm

- 2 layers104.1 × 50.8 mm

- 2 layers132.1 × 83.8 mm

Similar boards
- 2 layers326.7 × 132.7 mm

- 2 layers88.9 × 106 mm

- 2 layers317.3 × 154.8 mm

LCK75
lyso1/LCK75v3
The 2nd revision of the LCK75, this is updated to have support for ISO and split backspace layout options
208 parts10MIT - 2 layers127 × 128.5 mm

Dolphins
apaleslimghost/synths
schematics, PCBs, designs and code for Pale Slim Ghost Synthesisers hardware
208 parts5 - 2 layers69.5 × 98.3 mm

Floppy Board v3.0
FloppyO1/Floppy_Boards
Floppy Boards are a series of breakout boards for rapid prototyping which I developed as an alternative of Arduino.
208 parts5CERN-OHL-S-2.0 - 2 layers100 × 100 mm

- 2 layers173.5 × 85 mm

Whitterm hat
tuna-f1sh/whitterm-wt220
Design files, firmware and linux scripts for my /clever/ serial terminal, the Whitterm-220 - WT-220.
208 parts4GPL-3.0 - 2 layers101.6 × 101.6 mm

Questions
How big is the Motherboard PCB?
It measures 222.3 × 127 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Motherboard use?
208 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motherboard KiCad files?
From the ethanjamesauto/modular_8bit_computer repository on GitHub, at the commit this page was made from: the board is motherboard/motherboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motherboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask ethanjamesauto before reusing the design.