

Eddie bldc
- Size
- 48.3 × 48.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 138
- Nets
- 37
- Pads
- 253
- Tracks, vias
- 469, 39
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Aug 2024
- Updated
- 8 Nov 2025
Overview
Eddie bldc is an open-source printed circuit board by ethanjamesauto, from the ethanjamesauto/modular_8bit_computer repository on GitHub. It is a 2-layer board of 48.3 × 48.3 mm with 138 parts on 37 nets, routed with 469 tracks and 39 vias.
It is built around the IRS2005SPBF. Its parts include 88 connectors, 16 resistors, 15 capacitors, 6 ICs and 6 transistors. It belongs with the robots and motor control boards of this library.
Main components
1README
README.mdModular 8-bit Computer
This is the repository for an 8-bit computer system that is built using cards with a standardized interface.
- CPU card
- Protoboard card
- This card contains an onboard clock generator, address and data registers/buffers, and a protoboard area for testing designs.
- Bus interface modeling
Here's an example of a card:

Current Bus Specification
// The main bus wires (32+8=40 wires total)
// On the bus connector, all buses have LSBs closer to the power pins and MSBs farther away
wire VCC_5V;
wire GND;
wire clk; // generated by motherboard clock generator
wire rst_n; // probably a button on the motherboard
wire VCC_3V3;
wire we_n; // active LOW
wire oe_n; // active LOW
wire int_n; // pulled up by motherboard; driven down by any peripheral (could be used for interrupts)
wire [7:0] data;
wire [15:0] addr; // 64k address space is suppored by default. More address bits may be added later
wire [7:0] aux_bus;Parts
138| Qty | Value | Footprint | References |
|---|---|---|---|
| 80 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10, J10, J10, J10, J11, J11, J11, J11, J12, J12, J12, J12, J13, J13, J13, J13 +64 |
| 15 | C | Resistor_SMD:R_0603_1608Metric | C1, C1_BOOT1, C1_BOOT2, C1_BOOT3, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 13 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 8 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J1, J2, J2, J3, J3, J7, J7 |
| 6 | NMOS | Package_TO_SOT_SMD:TO-252-3_TabPin2 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 3 | D | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 3 | INA180A2 | Package_TO_SOT_SMD:SOT-23-5 | U2, U4, U6 |
| 3 | IRS2005S | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U3, U5 |
| 3 | R | Resistor_SMD:R_1206_3216Metric | R3_SHUNT1, R3_SHUNT2, R3_SHUNT3 |
| 1 | LED | Resistor_SMD:R_0603_1608Metric | D4 |
| 1 | LOGO | AudioJacks:ayo | G*** |
| 1 | LOGO | AudioJacks:ayo2 | G*** |
| 1 | LOGO | AudioJacks:isssabell | G*** |
More from ethanjamesauto/modular_8bit_computer
12- 2 layers229.9 × 93.3 mm

- 2 layers229.9 × 83.8 mm

- 2 layers229.9 × 93.3 mm

- 2 layers229.9 × 83.8 mm

- 2 layers222.3 × 127 mm

- 2 layers86.4 × 53.8 mm

- 2 layers229.9 × 86.4 mm

- 2 layers2.8 × 6.6 mm

- 2 layers111.8 × 77.2 mm

- 2 layers119.4 × 45.7 mm

- 2 layers104.1 × 50.8 mm

- 2 layers132.1 × 83.8 mm

Similar boards
- 4 layers174 × 104 mm

- 4 layers217 × 152 mm

- 2 layers391 × 45 mm

AddOnB
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
138 parts226CC-BY-SA-4.0 - 2 layers80 × 60 mm

- 2 layers87.9 × 98.7 mm

Bitdoglab smd
BitDogLab/BitDogLab
Open-source educational hardware for embedded systems, programming, electronics, and physical computing.
138 parts203 - 2 layers247.6 × 99.2 mm

Romeo pcb
coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C
138 parts148GPL-3.0 - 2 layers313.8 × 110.8 mm
/PCB/openot%20hotswap/openot%20rev2.kicad_pcb.jpg?size=s&soon)
- 2 layers271.3 × 120 mm

Questions
How big is the Eddie bldc PCB?
It measures 48.3 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Eddie bldc use?
138 parts, built around the IRS2005SPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eddie bldc KiCad files?
From the ethanjamesauto/modular_8bit_computer repository on GitHub, at the commit this page was made from: the board is eddie_bldc/eddie_bldc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eddie bldc design in my own project?
Its repository states no licence, so its author keeps all rights: ask ethanjamesauto before reusing the design.