2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0
2 layers
STM32-CSK Module
ethanharstad/STM32-CSK-ModuleSTM32 based processor board for the CubeSat kit motherboard
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 165
- Pads
- 314
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 21 Nov 2014
- Updated
- 2 Mar 2015
Overview
STM32-CSK Module is an open-source printed circuit board by ethanharstad, from the ethanharstad/STM32-CSK-Module repository on GitHub. It is a 2-layer board with 33 parts on 165 nets.
It is built around the STM32F417VGT6. Its parts include 19 capacitors, 3 resistors, 2 ICs and 1 connector. It belongs with the computers and single-board computers boards and the STM32 boards of this library.
Main components
1README
README.mdSTM32-CSK-Module
STM32 based processor board for the CubeSat kit motherboard
Uses the Aerodyne Labs KiCad library https://github.com/aerodynelabs/kicadlib
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitors:CAPC1608N | C1, C2, C5, C6, C7, C8, C10, C12, C13, C18, C19 |
| 6 | VAL** | Mechanical:MTGP575H254 | MECH-HOLE220, MECH-HOLE220, MECH-HOLE220, MECH-HOLE220, MECH-HOLE220, MECH-HOLE220 |
| 4 | Capacitor | Capacitors:CAPC1608N | C14, C15, C16, C17 |
| 2 | 0 | Resistors:RESC1608N | R2, R3 |
| 2 | 2.2uF | Capacitors:CAPC1608N | C9, C11 |
| 1 | 10k | Resistors:RESC1608N | R1 |
| 1 | 1uF | Capacitors:CAPC1608N | C3 |
| 1 | 4.7uF | Capacitors:CAPC1608N | C4 |
| 1 | Conn_Cortex-JTAG-10 | Connectors:Conn_Samtec-FTSH-105-D-RA-K | J1 |
| 1 | Conn_Cubesat-PPM | Connectors:Conn_Samtec-LSS-150 | H1 |
| 1 | Ferrite | Inductors:INDC1608N | FB1 |
| 1 | S34ML02G104T | SOP:SOP50P2000-48N | U2 |
| 1 | STM32F417VGT | QFP:QFP50P1600X1600-100N | U1 |
Questions
What parts does the STM32-CSK Module use?
33 parts, built around the STM32F417VGT6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32-CSK Module KiCad files?
From the ethanharstad/STM32-CSK-Module repository on GitHub, at the commit this page was made from: the board is Hardware/STM32-CSK-Module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32-CSK Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask ethanharstad before reusing the design.
Similar boards
- 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
