Skip to the content
2 layers48.5 × 31.5 mmNIRS Heat Testing, the printed circuit board in 3D
Size
48.5 × 31.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
6
Pads
26
Tracks, vias
13, 46
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
24 May 2024
Updated
12 Jul 2024

Overview

NIRS Heat Testing is an open-source printed circuit board by estar-lab, from the estar-lab/NIRS-Heat-Testing repository on GitHub. It is a 2-layer board of 48.5 × 31.5 mm with 11 parts on 6 nets, routed with 13 tracks and 46 vias.

Its parts include 4 resistors, 4 diodes, 2 capacitors and 1 connector.

README

README.md

Thermistor Documentation

Background

This project is meant to provide scientific backing for a change to the NIRS system so that it does not cause any burns to the Dolphins. NIRS is a system that uses LED light sources to bounce photons off tissue to determine concentrations of specific molecules in the subject's bloodstream. Although the current system returns excellent results, the system causes burns on the subject's skin. Therefore we attempt to quantify the burn damage to the dolphin skin and create a design solution that minimizes damage.

Test Setup Design

Given the simplicity of the design, we opted for a simple circuit where a thermistor was placed in series with a 10-kilohm resistor (with voltage being dropped across the thermistor first). Using a teensy 4.0, we would measure the voltage across the resistor and thus achieve a direct relationship between temperature and pressure.

Voltage to Temperature Reading

According to the literature[1], we can create an accurate fit using a quartic polynomial from the ratio of the thermistor resistance to the 10-kilohm resistor and the reciprocal of temperature.

Calibration Curves and Residuals

alt text

alt text

alt text

Calibration Data

This data can be found in the Code directory of the main branch

References

[1]: S. Rudtsch and C. von Rohden, “Calibration and self-validation of thermistors for high- precision temperature measurements,” Measurement, vol. 76, pp. 1–6, Dec. 2015. doi:10.1016/j.measurement.2015.07.028.

Parts

11
QtyValueFootprintReferences
223Resistor_THT:R_Axial_DIN0614_L14.3mm_D5.7mm_P25.40mm_HorizontalR1, R2
235Resistor_THT:R_Axial_DIN0614_L14.3mm_D5.7mm_P25.40mm_HorizontalR3, R4
2640KiCad:SST10IRB90K85000LED3, LED4
2850KiCad:SST10IRB90K85000LED1, LED2
10.1 uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC1
14.7 uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC2
1Conn_01x02_PinConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ1

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the NIRS Heat Testing PCB?

It measures 48.5 × 31.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the NIRS Heat Testing use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the NIRS Heat Testing KiCad files?

From the estar-lab/NIRS-Heat-Testing repository on GitHub, at the commit this page was made from: the board is PCB/PCB.kicad_pcb and its schematic PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the NIRS Heat Testing design in my own project?

Its repository states no licence, so its author keeps all rights: ask estar-lab before reusing the design.