
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

NIRS Heat Testing is an open-source printed circuit board by estar-lab, from the estar-lab/NIRS-Heat-Testing repository on GitHub. It is a 2-layer board of 48.5 × 31.5 mm with 11 parts on 6 nets, routed with 13 tracks and 46 vias.
Its parts include 4 resistors, 4 diodes, 2 capacitors and 1 connector.
This project is meant to provide scientific backing for a change to the NIRS system so that it does not cause any burns to the Dolphins. NIRS is a system that uses LED light sources to bounce photons off tissue to determine concentrations of specific molecules in the subject's bloodstream. Although the current system returns excellent results, the system causes burns on the subject's skin. Therefore we attempt to quantify the burn damage to the dolphin skin and create a design solution that minimizes damage.
Given the simplicity of the design, we opted for a simple circuit where a thermistor was placed in series with a 10-kilohm resistor (with voltage being dropped across the thermistor first). Using a teensy 4.0, we would measure the voltage across the resistor and thus achieve a direct relationship between temperature and pressure.
According to the literature[1], we can create an accurate fit using a quartic polynomial from the ratio of the thermistor resistance to the 10-kilohm resistor and the reciprocal of temperature.



This data can be found in the Code directory of the main branch
[1]: S. Rudtsch and C. von Rohden, “Calibration and self-validation of thermistors for high- precision temperature measurements,” Measurement, vol. 76, pp. 1–6, Dec. 2015. doi:10.1016/j.measurement.2015.07.028.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 23 | Resistor_THT:R_Axial_DIN0614_L14.3mm_D5.7mm_P25.40mm_Horizontal | R1, R2 |
| 2 | 35 | Resistor_THT:R_Axial_DIN0614_L14.3mm_D5.7mm_P25.40mm_Horizontal | R3, R4 |
| 2 | 640 | KiCad:SST10IRB90K85000 | LED3, LED4 |
| 2 | 850 | KiCad:SST10IRB90K85000 | LED1, LED2 |
| 1 | 0.1 uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | 4.7 uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 48.5 × 31.5 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the estar-lab/NIRS-Heat-Testing repository on GitHub, at the commit this page was made from: the board is PCB/PCB.kicad_pcb and its schematic PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask estar-lab before reusing the design.