2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
2 layers
Esp 12
eskrut/kicadTemplate- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 23
- Pads
- 41
- Tracks, vias
- 83, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Jun 2016
- Updated
- 6 Jun 2016
Overview
Esp 12 is an open-source printed circuit board by eskrut, from the eskrut/kicadTemplate repository on GitHub. It is a 2-layer board with 9 parts on 23 nets, routed with 83 tracks and 0 vias.
It is built around the ESP-12E. Its parts include 6 resistors, 1 capacitor, 1 IC and 1 connector. It belongs with the ESP8266 boards of this library.
Main components
1Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistors_SMD:R_1210_HandSoldering | R1, R2, R3, R4 |
| 2 | 470 | Resistors_SMD:R_1210_HandSoldering | R5, R6 |
| 1 | 0.1uF | Capacitors_SMD:C_1210_HandSoldering | C1 |
| 1 | ESP-12E | ESP8266:ESP-12E | U1 |
| 1 | ESP_PROG | Pin_Headers:Pin_Header_Straight_1x05 | P1 |
Questions
What parts does the Esp 12 use?
9 parts, built around the ESP-12E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp 12 KiCad files?
From the eskrut/kicadTemplate repository on GitHub, at the commit this page was made from: the board is esp_12/esp_12.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp 12 design in my own project?
Its repository states no licence, so its author keeps all rights: ask eskrut before reusing the design.
Similar boards
- 2 layers43 × 34.3 mm
- 2 layers25.6 × 23 mm
Breakout
skorokithakis/tiny-ESP8266-breakout
A very small and basic ESP8266 breakout board
12 parts115BSD-2-Clause - 2 layers104.8 × 72.1 mm
SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers30 × 65 mm
Hardpass pcb
girst/hardpass-passwordmanager-mirror-of-git.gir.st
https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.
34 parts101GPL-3.0 - 2 layers82.5 × 22.4 mm
Window Sensor
MakerMeik/Window-Sensor
Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w
19 parts67 - 2 layers49.5 × 30 mm
- 2 layers100 × 45 mm
