2 layers15 × 16 mm
2 layers24.5 × 28 mm
Ftdi-100mil
esden/ftdi-multitool17A modular FTDI FT232H USB to X tool.
- Size
- 24.5 × 28 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 2
- Nets
- 20
- Pads
- 40
- Tracks, vias
- 55, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 May 2018
- Updated
- 9 May 2018
Overview
Ftdi-100mil is an open-source printed circuit board by esden, from the esden/ftdi-multitool repository on GitHub. It is a 2-layer board of 24.5 × 28 mm with 2 parts on 20 nets, routed with 55 tracks and 0 vias.
README
README.mdThis repository contains hardware designs for an FTDI FT232H based multi purpose tool.
The design goal is to make a very small FTDI breakout board that has a defined connector. That defined connector can receive a wide range of easy to design adapters. The adapters can then plug in into any variety of targets. The FTDI chip has a fairly wide range of protocols it supports, making it ideal for many applications.
Protocol List
- TTY UART Serial (with or without hardware flow control)
- SPI using MPSSEngine
- I2C
- JTAG
- CPU Data Address
Datasheet
For more information on the FTDI FT232 please refer to the chip's datasheet.
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn | pkl_samtec:FTSH-EDGE-20pin | J1 |
| 1 | Conn | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J2 |
More from esden/ftdi-multitool
3- 2 layers18 × 18 mm
- 2 layers18 × 18 mm
Similar boards
- 2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0 - 2 layers33 × 19 mm
- 2 layers
Diode template
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
2 parts547GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 button
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
2 parts546MIT - 2 layers35.1 × 46.8 mm
SDEX2M2 Breakout Board
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
2 parts542GPL-3.0 - 2 layers59.3 × 36.6 mm
ExpansionBoardTemplate
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
2 parts459GPL-3.0 - 2 layers
Alpha.9mm.wire
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
2 parts410 - 2 layers26.7 × 64 mm
Questions
How big is the Ftdi-100mil PCB?
It measures 24.5 × 28 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Ftdi-100mil use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ftdi-100mil KiCad files?
From the esden/ftdi-multitool repository on GitHub, at the commit this page was made from: the board is adapters/100mil/v1.0a/ftdi-100mil.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ftdi-100mil design in my own project?
Its repository states no licence, so its author keeps all rights: ask esden before reusing the design.