2 layers65.8 × 48.3 mm
Dummy radio
ESD625-Fedtmules-muler/PublicAppendix
Public Appendix for the 6th semester project. Consisting of test data.
15 parts
2 layers77.5 × 75 mm
Controller
ESD625-Fedtmules-muler/PublicAppendixPublic Appendix for the 6th semester project. Consisting of test data.
- Size
- 77.5 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 34
- Pads
- 108
- Tracks, vias
- 116, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 26 May 2026
- Updated
- 27 May 2026
Overview
Controller is an open-source printed circuit board by ESD625-Fedtmules-muler, from the ESD625-Fedtmules-muler/PublicAppendix repository on GitHub. It is a 2-layer board of 77.5 × 75 mm with 17 parts on 34 nets, routed with 116 tracks and 8 vias.
Its parts include 10 connectors, 2 capacitors, 2 resistors, 2 diodes and 1 IC.
README
README.mdPublicAppendix
Public Appendix for the 6th semester project. Consisting of test data. In these folder the following can be found
- Antenna_measurements: The measured antenna s-parameters & and radiation patterns.
- Inventor: The CAD files used for this project.
- Meshing_Firmware: A separate git repository including the different branches of the developed mesh firmware and network stack.
- Monte_carl_sim: A separate git repository showing all branches of the software used for simulating antenna parameters.
- Test: The raw testdata from the physical tests along with a javascript plotter to genereate the graphs illustrated in chapter 6.
All content including subdirectories can be downloaded by
git clone --recurse-submodules git@github.com:ESD625-Fedtmules-muler/PublicAppendix.gitParts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x15 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J6, J7, J9, J10 |
| 2 | 10u | Capacitor_THT:C_Radial_D5.0mm_H7.0mm_P2.00mm | C1, C2 |
| 2 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 500 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Horizontal | J4 |
| 1 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J8 |
| 1 | Conn_01x06 | Connector_Molex:Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical | J3 |
| 1 | Green_LED | LED_THT:LED_D4.0mm | D2 |
| 1 | Gul_LED | LED_THT:LED_D4.0mm | D1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U2 |
Questions
How big is the Controller PCB?
It measures 77.5 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the ESD625-Fedtmules-muler/PublicAppendix repository on GitHub, at the commit this page was made from: the board is Hardware/Controller/Controller.kicad_pcb and its schematic Hardware/Controller/Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask ESD625-Fedtmules-muler before reusing the design.
More from ESD625-Fedtmules-muler/PublicAppendix
1Similar boards
- 2 layers50 × 35 mm
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
